MATERS RI58K12M MASTERS EMERG REPAIR TAPE 2 X 12RLL HARD SHELL
Product Details
Attributes
Features
Resources
MASTERS® Repair Tape, Emergency, 12 ft Length, 2 in Width, Black/Blue/Red/Yellow, 150 psi Tensile Strength, -130 to 500 deg F
MASTERS® emergency REPAIR tape is non-adhesive, so it works well on many types of piping including galvanized, copper, PVC, ABS, PEX and cast iron. It is environmentally safe and non-toxic. MASTERS® emergency REPAIR tape has no temperate storage requirements, withstanding both hot and cold conditions. It is UV and tear resistant, allowing for maximum stretch. Pulling the tape as tight as possible allows it to seal by compression, forming a silicone mass to prevent leakage.
- No temperate storage requirements, withstanding both hot and cold conditions
- It is UV and tear-resistant, allowing for maximum stretch
- Seals by compression, forming a silicone mass to prevent leakage
- Clean surface before starting repair, dirt may cause unwanted air pockets in the seal
- Starting with a 12 in piece of tape, start wrapping directly over leak or crack (or slightly off to the side if the line is active)
- Wrap at maximum tension back and forth over the problem area, overlapping 50% of the way each time using white center line as guide
- Progressively expand the wrapped area until the tape covers the problem areas
- Wrap final layer of tape at minimal tension around the sealed section to act as protection for the high tension seal beneath
- Repeat layers as needed
Product Details
MASTERS® Repair Tape, Emergency, 12 ft Length, 2 in Width, Black/Blue/Red/Yellow, 150 psi Tensile Strength, -130 to 500 deg F
MASTERS® emergency REPAIR tape is non-adhesive, so it works well on many types of piping including galvanized, copper, PVC, ABS, PEX and cast iron. It is environmentally safe and non-toxic. MASTERS® emergency REPAIR tape has no temperate storage requirements, withstanding both hot and cold conditions. It is UV and tear resistant, allowing for maximum stretch. Pulling the tape as tight as possible allows it to seal by compression, forming a silicone mass to prevent leakage.
Attributes
Features
- No temperate storage requirements, withstanding both hot and cold conditions
- It is UV and tear-resistant, allowing for maximum stretch
- Seals by compression, forming a silicone mass to prevent leakage
- Clean surface before starting repair, dirt may cause unwanted air pockets in the seal
- Starting with a 12 in piece of tape, start wrapping directly over leak or crack (or slightly off to the side if the line is active)
- Wrap at maximum tension back and forth over the problem area, overlapping 50% of the way each time using white center line as guide
- Progressively expand the wrapped area until the tape covers the problem areas
- Wrap final layer of tape at minimal tension around the sealed section to act as protection for the high tension seal beneath
- Repeat layers as needed