DEWALT 08134P-PWR 29OZ TRIGGER FOAM PRO WINDOW AND DOOR SEALER
Product Details
Attributes
Features
Resources
DeWALT® TriggerFoam™ Pro Expanding Foam, Can Container, 29 oz Container, 29 oz Net Weight, Foam Form, 1 to 5 hr Drying, 12 to 15 hr Curing, Applicable Materials: Aluminum/Concrete/Masonry/Metal/Steel/Wood
TriggerFoam™ Pro is a one part polyurethane expanding foam which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the additional expansion of the foam after it leaves the nozzle. The surface of the foam initially dries within 1 to 5 hr and becomes fully cured in 12 to 15 hr. Low pressure formula will not distort windows and door frames. TriggerFoam™ Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.
- CFC-free propellant
- Class B2 flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB's
- Does not rot or deteriorate with age
- Low odor
- High foam yield up to 1.6 cu-ft per 29 oz can
- Easily adjustable applicator can dispense foam beads as small as 1/8 in
- Hardened steel dispenser tip for longer life on metal tool
- Precision valve helps prevent pressure loss and prolongs shelf life
Product Details
DeWALT® TriggerFoam™ Pro Expanding Foam, Can Container, 29 oz Container, 29 oz Net Weight, Foam Form, 1 to 5 hr Drying, 12 to 15 hr Curing, Applicable Materials: Aluminum/Concrete/Masonry/Metal/Steel/Wood
TriggerFoam™ Pro is a one part polyurethane expanding foam which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the additional expansion of the foam after it leaves the nozzle. The surface of the foam initially dries within 1 to 5 hr and becomes fully cured in 12 to 15 hr. Low pressure formula will not distort windows and door frames. TriggerFoam™ Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.
Attributes
Features
- CFC-free propellant
- Class B2 flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB's
- Does not rot or deteriorate with age
- Low odor
- High foam yield up to 1.6 cu-ft per 29 oz can
- Easily adjustable applicator can dispense foam beads as small as 1/8 in
- Hardened steel dispenser tip for longer life on metal tool
- Precision valve helps prevent pressure loss and prolongs shelf life