Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
IPEX XFR 526413 3 PVC SLIP CAP
MFR Part #: 526413
SKU #: 1030518
Brand: IPEX®
UPC: 622454323681
System XFR® 526413 Slip Cap, 3 in Hub, PVC, Dark Gray, SCH 40
Commercial, Industrial, Residential, Above Ground and Underground Applications
CSA B181.2 | cULus S102.2 | cWH Intertek Listed
Product Details
Attributes
Features
Resources
System XFR® Slip Cap, Cap Fitting, 3 in Connection, Hub Connection, PVC, Material Construction: PVC, Dark Gray, SCH 40
This hub ended cap connects to a System XFR spigot to cap off the end of a piping run.
Connection Size:3 in
Fitting Type:Cap
Color:Dark Gray
Connection Type:Hub
Material:PVC
Material Construction:PVC
Schedule Rating:SCH 40
- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
Product Details
System XFR® Slip Cap, Cap Fitting, 3 in Connection, Hub Connection, PVC, Material Construction: PVC, Dark Gray, SCH 40
This hub ended cap connects to a System XFR spigot to cap off the end of a piping run.
Attributes
Connection Size: 3 in
Fitting Type: Cap
Color: Dark Gray
Connection Type: Hub
Material: PVC
Material Construction: PVC
Schedule Rating: SCH 40
Features
- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation