content loaded
BRADFORD D65T6253NA-807 Image 1

BRADFORD D65T6253NA-807 HIGH-ALTITUDE 65USG 625MBH NATURAL GAS ASME COMMERCIAL WATER HEATER

MFR Part #: D65T6253NA-807
SKU #: 1256364
Brand: Bradford White®
UPC: 671632275748
Bradford White® D65T6253NA Induced Draft Gas Water Heater, 65 gal Tank, Domestic, 625000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %
3 Years Limited on Tank/1 Year Limited on Component Parts
Temperature and Pressure Relief Valve
Commercial Applications
AHRI Certified | ANSI Z-21.10.3 | ASHRAE 90.1b | ASME HLW | CEC Listed | CSA LLC-Low Lead Content | CSA International (Formerly AGA/CGA) | NSF 372 | PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Bradford White® Gas Water Heater, Induced Draft, 625000 Btu/hr Heating, Natural Gas, 1 in Gas Connection, 65 gal Tank, Electronic Ignition, Atmospheric Vent, 8 in Vent Size, 1515 gph at 40 deg F Rise Recovery, 80 % Energy Efficient, 1-1/2 in NPT Water Connection, 150 psi, 180 deg F, Ultra Low NOx: No, ASME Yes/No: Yes, Steel, Vitraglas®, 28-1/4 in Dia x 39-7/8 in D x 73-3/8 in H, Domestic

The -807 indicates that this SKU was designed to operate in High Altitudes ranging from 2,000 to 4,500 feet, and are certified for Installation in Canada.

Bradford White 65 Gallon Commercial Gas (Natural) Atmospheric Vent ASME Water Heater with Induced Draft and Electronic Ignition. 3-Year Tank Warranty, 625,000 BTU/Hr.

Product Details

Bradford White® Gas Water Heater, Induced Draft, 625000 Btu/hr Heating, Natural Gas, 1 in Gas Connection, 65 gal Tank, Electronic Ignition, Atmospheric Vent, 8 in Vent Size, 1515 gph at 40 deg F Rise Recovery, 80 % Energy Efficient, 1-1/2 in NPT Water Connection, 150 psi, 180 deg F, Ultra Low NOx: No, ASME Yes/No: Yes, Steel, Vitraglas®, 28-1/4 in Dia x 39-7/8 in D x 73-3/8 in H, Domestic

The -807 indicates that this SKU was designed to operate in High Altitudes ranging from 2,000 to 4,500 feet, and are certified for Installation in Canada.

Bradford White 65 Gallon Commercial Gas (Natural) Atmospheric Vent ASME Water Heater with Induced Draft and Electronic Ignition. 3-Year Tank Warranty, 625,000 BTU/Hr.

Attributes

ASME Yes/NoYes
Country Of OriginUS
Dimensions28-1/4 in Dia x 39-7/8 in D x 73-3/8 in H
Domestic/ImportDomestic
Energy Efficiency80 %
FinishVitraglas®
Fuel TypeNatural Gas
Gas Connection1 in
Heating Capacity625000 Btu/hr
Ignition TypeElectronic
MaterialSteel
Pressure Rating150 psi
Recovery Rate1515 gph at 40 deg F Rise
Tank Capacity65 gal
Temperature Rating180 deg F
TypeInduced Draft
Ultra Low NOxNo
Vent Size8 in
Vent TypeAtmospheric
Water Connection1-1/2 in NPT
Water Heater TypeGas

Features

  • ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display
  • Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting
  • Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button
  • Factory installed Hydrojet® sediment reduction system
  • Vitraglas® lining
  • Insulation system - 2 in Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss
  • Potable water connections
  • Protective magnesium anode rod
  • Hand hole cleanout
  • An automatic re-set energy cut off (E.C.O) shuts off all gas in event of an overheat condition
  • Sanitizing capability
  • Brass drain valve
  • 4.5 in WC