Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
WATTS 0009814 LF26A 3/8 IP 1-25PSI WATER PRESSURE REGULATOR
Product Details
Attributes
Features
Resources
WATTS®, 0009814, Pressure Regulator, Small, Series: LF26A, 3/8 in Nominal, FNPT End Style, 300 psi Pressure, 0 to 140 deg F, Media: Water, T-Handle Actuator, 2-1/8 in Inlet to Outlet Length, Brass Body, Buna-N®/Stainless Steel Softgoods, 4-3/8 in H Dimensions
This 3/8 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 1 to 25 psi (0.1 to 1.7 bar) and is factory set at 10 psi (0.7 bar).
- Oversized orifice
- Tee handle adjustment
- NPT threaded female inlet and outlet connections
- Temperature range is 0 to 140 deg F (-18 to 60 deg C)
- Maximum working pressure is 300 psi (21 bar)
Product Details
WATTS®, 0009814, Pressure Regulator, Small, Series: LF26A, 3/8 in Nominal, FNPT End Style, 300 psi Pressure, 0 to 140 deg F, Media: Water, T-Handle Actuator, 2-1/8 in Inlet to Outlet Length, Brass Body, Buna-N®/Stainless Steel Softgoods, 4-3/8 in H Dimensions
This 3/8 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 1 to 25 psi (0.1 to 1.7 bar) and is factory set at 10 psi (0.7 bar).
Attributes
Features
- Oversized orifice
- Tee handle adjustment
- NPT threaded female inlet and outlet connections
- Temperature range is 0 to 140 deg F (-18 to 60 deg C)
- Maximum working pressure is 300 psi (21 bar)