content loaded
LIBERTY OTC-230 Image 1

LIBERTY OTC-230 OILTECTOR CONTROL W/ALARM 230V (MAX 2HP)

MFR Part #: OTC-230
SKU #: 1154608
Brand: Liberty Pumps®
UPC: 671812114843
Liberty Pumps® OTC-230 ELV, 230 VAC, 3 Phase , NEMA 1 Enclosure, 25 ft Cord, 2 hp, For Use With Model ELV250 and ELV280 Sump Pump System
3 Years
For elevators, garages and areas where the discharge of oil/hydrocarbons into the environment is prohibited
ASME A17.1 | cCSAus Certified | cULus Listed | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Liberty Pumps®, OTC-230, Series: ELV, 230 VAC, 3 ph, Specifications: NEMA 1 Enclosure, 25 ft Cord, 2 hp, For Use With: Model ELV250 and ELV280 Sump Pump System, Cast Iron

The OilTector® control system is designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1 and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

Product Details

Liberty Pumps®, OTC-230, Series: ELV, 230 VAC, 3 ph, Specifications: NEMA 1 Enclosure, 25 ft Cord, 2 hp, For Use With: Model ELV250 and ELV280 Sump Pump System, Cast Iron

The OilTector® control system is designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1 and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

Attributes

Country Of OriginUS
Phase3
Voltage Rating230 VAC
MaterialCast Iron
SeriesELV
SpecificationsNEMA 1 Enclosure, 25 ft Cord, 2 hp
Suitable For Use WithModel ELV250 and ELV280 Sump Pump System

Features

  • Easy, clamp mounted pre-set level sensor holder
  • No field adjustments required, OilTector® will turn pumps on and off, sound the high water alarm and high oil alarm with one easy installation
  • Plug-in ready pump cord and power to panel cord for quick and easy installation
  • Remote alarm with auxiliary contacts for connection to building automation or SCADA system, 24 VAC/VDC, 100 mA max switching
  • Control panel with separate pump and control circuits