content loaded
MASTERS ABS500-1 Image 1

MASTERS ABS500-1 ABS-PRO MEDIUM YELLOW CEMENT 473ML

MFR Part #: ABS500-1
SKU #: 1237192
Brand: Oatey | MASTERS®
UPC: 067001022417
MASTERS® ABS500-1 Medium Body Cement, 473 mL Container, Yellow, For Use With On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Non-Pressure Applications
CSA B181.1 | ASTM D2235 | NSF 14 for DWV and Sewer | APMO Listed | Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements

MASTERS®, ABS500-1, Cement, Medium Body, 473 mL Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F

Product Details

MASTERS®, ABS500-1, Cement, Medium Body, 473 mL Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F

Attributes

Container Size473 mL
TypeMedium Body
ColorYellow
CompositionStyrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone
Odor/ScentSolvent
Setting Time5 to 6, 3 to 4, 1 to 2 min
Suitable For Use WithOn all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Temperature Rating40 to 110 deg F

Features

  • Cut pipe ends square chamfer and clean pipe ends
  • Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
  • Use a suitable applicator at least 1/2 the size of the pipe diameter
  • Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
  • Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
  • Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
  • Apply a second coat of cement to the pipe
  • Assemble parts quickly as cement must be in a fluid state when joining
  • Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
  • Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
  • Wipe off excess cement for a clean esthetic appearance
  • Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping