Scheduled Maintenance
Our website will be unavailable for scheduled maintenance during the following times:
• Saturday, June 28 from 7:00 PM MST to
Sunday, June 29 at 1:00 AM MST
• Monday, June 30 from 4:00 AM to 6:00 AM MST
We apologize for any inconvenience. For assistance, please contact
[email protected]
.
OATEY PVC1L-G MASTERS PVC-PRO MEDIUM GREY CEMENT 946ML
Product Details
Attributes
Features
Resources
MASTERS®, PVC1L-G, Cement, Medium Body Fast Set, 946 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Gray, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, PVC1L-G, Cement, Medium Body Fast Set, 946 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Gray, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Attributes
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping