Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
EATON OSUL06D-C2 OCC SW DIM SP 600W UNV W V LIGHT ALMOND
Product Details
Attributes
Features
Resources
EATON, OSUL06D-C2-K-L, Dimmer Sensor, 3-Way 1-Pole Wallbox, 120 V AC, 600 W Power, Motion/Occupancy Sensor, 1000 sq-ft Coverage, 180 deg Viewing, 5 s to 30 min Time Delay, Incandescent/Halogen/ELV/MLV Lamp, 60 Hz Response, Pre-Stripped Wire Lead Connection, Auto ON/OFF/Manual ON/OFF Control Output, Wall Mounting, 32 to 104 deg F, Polycarbonate, White/Light Almond/Ivory, 2.688 in L x 4.125 in W x 6.125 in H Dimensions
Enjoy advanced energy savings and state-of-the-art automation with Eaton’s occupancy and vacancy sensors. Eaton's motion sensor lighting controls use advanced Passive Infrared (PIR) and ultrasonic sensing technology to detect your presence and switch lights ON. Then, once you’ve left the room, our sensors turn the lights OFF following a preset period of time. Sensors are the perfect solution for commercial and residential applications where a switch is inconveniently located and in spaces where lights may be left on accidentally.
- Soft on/fade off
- Preset and light level change is easily shown with horizontal row of green LEDs
- Single green LED indicates load status, provides locator light in dark and blinks to indicate motion detection
- Push pad design provides minimal travel and crisp actuation
- Provides 180 deg field of view and 1000 sq-ft of major motion coverage
- Reverse mode allows light to stay off in a room when motion is detected
- Occupancy sensors time delay default set to 5 min, vacancy sensors time delay default set to 30 min
- Occupancy sensor provides a selectable ambient light override preventing lights from switching on when there is acceptable natural light
- Occupancy sensor version allows to toggle between auto on/auto off or manual on/auto off mode with a simple press and hold of switch
- Occupancy sensor provides for a bypass feature to allow the sensor to perform as a traditional switch (manual on/manual off)
- Electrostatic discharge protection
- No leakage to load in off mode
- Color change faceplate kits provide for a simple in field change
- Neutral required for installation of device
Product Details
EATON, OSUL06D-C2-K-L, Dimmer Sensor, 3-Way 1-Pole Wallbox, 120 V AC, 600 W Power, Motion/Occupancy Sensor, 1000 sq-ft Coverage, 180 deg Viewing, 5 s to 30 min Time Delay, Incandescent/Halogen/ELV/MLV Lamp, 60 Hz Response, Pre-Stripped Wire Lead Connection, Auto ON/OFF/Manual ON/OFF Control Output, Wall Mounting, 32 to 104 deg F, Polycarbonate, White/Light Almond/Ivory, 2.688 in L x 4.125 in W x 6.125 in H Dimensions
Enjoy advanced energy savings and state-of-the-art automation with Eaton’s occupancy and vacancy sensors. Eaton's motion sensor lighting controls use advanced Passive Infrared (PIR) and ultrasonic sensing technology to detect your presence and switch lights ON. Then, once you’ve left the room, our sensors turn the lights OFF following a preset period of time. Sensors are the perfect solution for commercial and residential applications where a switch is inconveniently located and in spaces where lights may be left on accidentally.
Attributes
Features
- Soft on/fade off
- Preset and light level change is easily shown with horizontal row of green LEDs
- Single green LED indicates load status, provides locator light in dark and blinks to indicate motion detection
- Push pad design provides minimal travel and crisp actuation
- Provides 180 deg field of view and 1000 sq-ft of major motion coverage
- Reverse mode allows light to stay off in a room when motion is detected
- Occupancy sensors time delay default set to 5 min, vacancy sensors time delay default set to 30 min
- Occupancy sensor provides a selectable ambient light override preventing lights from switching on when there is acceptable natural light
- Occupancy sensor version allows to toggle between auto on/auto off or manual on/auto off mode with a simple press and hold of switch
- Occupancy sensor provides for a bypass feature to allow the sensor to perform as a traditional switch (manual on/manual off)
- Electrostatic discharge protection
- No leakage to load in off mode
- Color change faceplate kits provide for a simple in field change
- Neutral required for installation of device