Scheduled Maintenance
Our website will be unavailable for scheduled maintenance during the following times:
• Saturday, June 28 from 7:00 PM MST to
Sunday, June 29 at 1:00 AM MST
• Monday, June 30 from 4:00 AM to 6:00 AM MST
We apologize for any inconvenience. For assistance, please contact
[email protected]
.
CALEFACTIO HGTE5 8L THERMAL TANK (FIXED BLADDER)
Product Details
Attributes
Features
Resources
Calefactio Fixed Bladder Thermal Expansion Tank, 2.1 gal Capacity, 3/4 in Connection, MNPT Connection, EPDM Diaphragm, Steel, 150 psi, 200 deg F, 7.9 in Dia x 13.7 in H
The HGTE-HGTEV series bladder expansion tanks are designed for use in domestic installations for potable hot water applications. The tanks are installed in systems equipped with a backflow preventer or as an add-on to direct or indirect water heaters. The tank’s function is to absorb the increased volume of water that results from the heating process, thereby keeping the system’s pressure below the relief valve setting.
- Acceptance factor of 100%
- Water remains permanently separated from the air throughout the useful life of the installation
- The water does not escape the circuit
- The steel tank never comes into contact with water
- Pre-charged at the factory to 50 psi, tank need to be adjusted on site at the system operating pressure
Product Details
Calefactio Fixed Bladder Thermal Expansion Tank, 2.1 gal Capacity, 3/4 in Connection, MNPT Connection, EPDM Diaphragm, Steel, 150 psi, 200 deg F, 7.9 in Dia x 13.7 in H
The HGTE-HGTEV series bladder expansion tanks are designed for use in domestic installations for potable hot water applications. The tanks are installed in systems equipped with a backflow preventer or as an add-on to direct or indirect water heaters. The tank’s function is to absorb the increased volume of water that results from the heating process, thereby keeping the system’s pressure below the relief valve setting.
Attributes
Features
- Acceptance factor of 100%
- Water remains permanently separated from the air throughout the useful life of the installation
- The water does not escape the circuit
- The steel tank never comes into contact with water
- Pre-charged at the factory to 50 psi, tank need to be adjusted on site at the system operating pressure