Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
1-1/4 VORTEX AIR SEPARATOR TACO VRTX125-3
Product Details
Attributes
Features
Resources
Taco® VorTech® Air Separator, 1-1/4 in Nominal, NPT, 150 psi Working, 240 deg F, Suitable Media: Water/Glycol Solution, 8 fps, Cast Iron, 7-5/8 in H x 5-3/4 in W
Designed to provide an enhanced level of air removal in hydronic heating, cooling or combination systems. Air is quickly and efficiently separated and vented through a factory-installed Taco 3/4 in Hy-Vent®. The Hy-Vent along with Taco's innovative tangential flow pattern and primary separation chamber make the Vortech the most effective and reliable air separator you can buy. It requires no minimum run of piping and the convenient 1/2 in bottom tapping makes it easy to install an expansion tank. Maximum operating pressure of 150 psi (1034 kPa) and maximum operating temperature of 240 deg F (115 deg C).
- Unique water flow pattern
- Works efficiently with both low velocity water and high velocity water
- 100% factory tested
- Unique bubble breaker cartridge
- Replaceable high capacity Hy-Vent®
- Enhanced air removal
- Convenient expansion tank connection tapping
- No minimum run of pipe required
- Vent can be closed
- Eliminates air induced system noise
- Stainless steel cartridge and plate
- FKM o-ring and Taco 419 vent
- 21.4 Cv
Product Details
Taco® VorTech® Air Separator, 1-1/4 in Nominal, NPT, 150 psi Working, 240 deg F, Suitable Media: Water/Glycol Solution, 8 fps, Cast Iron, 7-5/8 in H x 5-3/4 in W
Designed to provide an enhanced level of air removal in hydronic heating, cooling or combination systems. Air is quickly and efficiently separated and vented through a factory-installed Taco 3/4 in Hy-Vent®. The Hy-Vent along with Taco's innovative tangential flow pattern and primary separation chamber make the Vortech the most effective and reliable air separator you can buy. It requires no minimum run of piping and the convenient 1/2 in bottom tapping makes it easy to install an expansion tank. Maximum operating pressure of 150 psi (1034 kPa) and maximum operating temperature of 240 deg F (115 deg C).
Attributes
Features
- Unique water flow pattern
- Works efficiently with both low velocity water and high velocity water
- 100% factory tested
- Unique bubble breaker cartridge
- Replaceable high capacity Hy-Vent®
- Enhanced air removal
- Convenient expansion tank connection tapping
- No minimum run of pipe required
- Vent can be closed
- Eliminates air induced system noise
- Stainless steel cartridge and plate
- FKM o-ring and Taco 419 vent
- 21.4 Cv