Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
RIDGID 43358 RP340B BATT PRESS TOOL W/PROPRESS 1/2-2 JAWS
MFR Part #:Â 43358
SKU #:Â 1093033
Brand: RIDGID®
UPC:Â 0095691433589
RIDGID® 43358 RP 340 Battery Press Tool Kit With ProPress Jaws, 1/2 to 2 in Capacity, 7200 lb, 5 s Crimp, Li-Ion Battery
Lifetime
RP 340 Press Tool, AC Power Adapter and Carrying Case
Air Vacuum, Chilled Water, Potable and Hydronic Heating
ABS | CSA Certified | NSF | UL Listed
Product Details
Attributes
Features
Resources
RIDGID® Battery Press Tool Kit, 1/2 to 2 in, 7200 lb Ram, 5 s Crimp Time, Li-Ion Battery, 16-1/2 in L x 6-1/2 in W x 25-3/4 in H
Battery Type:Li-Ion
Capacity:1/2 to 2 in
Crimp Time:5 s
Dimensions:16-1/2 in L x 6-1/2 in W x 25-3/4 in H
Ram Force:7200 lb
- 270 deg rotating swivel barrel
- 7200 lb hydraulic ram output
- 15 to 112 deg F operating temperature range
- 4 sec approximate cycle time
- Led light for continued operations in no or low light environments
- 42000 cycles longest service interval in the industry
- Compatible with all standard series pressing jaws and attachments from RIDGID®
- For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe
- Smaller tool increases maneuverability, reduces operator fatigue
- Ultimate flexibility with the ability to switch between battery and AC power on the same tool
- Perfect for getting at hard to reach connections
- 18 v advanced Lithium 4 battery helps the RP 340 achieve more than 400 presses per charge, and it has an industry-leading service interval of 42000 cycles
- Designed to mechanically press fittings onto tubing to create a water tight and permanent seal
- Switch on the RP 340 is depressed, an internal electric motor powers a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force onto specially designed fittings
- 1/2 to 4 in copper and stainless steel and 1/2 to 2 in PFX capacity
Product Details
RIDGID® Battery Press Tool Kit, 1/2 to 2 in, 7200 lb Ram, 5 s Crimp Time, Li-Ion Battery, 16-1/2 in L x 6-1/2 in W x 25-3/4 in H
Attributes
Battery Type:Â Li-Ion
Capacity:Â 1/2 to 2 in
Crimp Time:Â 5 s
Dimensions:Â 16-1/2 in L x 6-1/2 in W x 25-3/4 in H
Ram Force:Â 7200 lb
Features
- 270 deg rotating swivel barrel
- 7200 lb hydraulic ram output
- 15 to 112 deg F operating temperature range
- 4 sec approximate cycle time
- Led light for continued operations in no or low light environments
- 42000 cycles longest service interval in the industry
- Compatible with all standard series pressing jaws and attachments from RIDGID®
- For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe
- Smaller tool increases maneuverability, reduces operator fatigue
- Ultimate flexibility with the ability to switch between battery and AC power on the same tool
- Perfect for getting at hard to reach connections
- 18 v advanced Lithium 4 battery helps the RP 340 achieve more than 400 presses per charge, and it has an industry-leading service interval of 42000 cycles
- Designed to mechanically press fittings onto tubing to create a water tight and permanent seal
- Switch on the RP 340 is depressed, an internal electric motor powers a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force onto specially designed fittings
- 1/2 to 4 in copper and stainless steel and 1/2 to 2 in PFX capacity