ABB THED136030 3 POLE 600VAC 30A BREAKER
Product Details
Attributes
Features
Resources
GE Molded Case Circuit Breaker, Type THED Core E High-Tier, 600 VAC, 30 A, 50/60 Hz, 10/25/65 kA Interrupt, E150 Frame, LI/Non-Interchangeable Thermal Magnetic Trip, 3 Pole, 3 ph, Pivot/Toggle Handle Actuator, Load Lug, 10 to 8 AWG Wire, 10 to 50 deg C, 4-1/8 in W x 3-3/8 in D x 6-5/16 in H, Plastic
The E150 product line consists of thermal magnetic circuit breakers, magnetic circuit breakers and molded case switches rated up to 150 A and 600 VAC. catalog numbers include the complete breaker or switch. the WL catalog number suffix indicates that the devices come with copper aluminum line and load lugs.
- Molded case is molded from high mechanical and high dielectric strength engineered plastic
- Trip indication is shown by handle position midway between ON and off to reset the trip mechanism, move the handle to extreme off then to ON position
- Quick-make, quick-break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position
- Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in ON position
- VERIFIER™ "twist-to-trip" and ''push-to-trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle
- Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates
- Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life
- Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs
- UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight in wiring
- Proven reliability
- Provide cost effective solutions
- Multiple types to fit in your application
- 10 kA at 125 VDC, 10 kA at 250 VDC, 25 kA at 277 VAC, 25 kA at 480 VAC, 65 kA at 120/240 VAC, 65 kA at 240 VAC interrupt rating
Product Details
GE Molded Case Circuit Breaker, Type THED Core E High-Tier, 600 VAC, 30 A, 50/60 Hz, 10/25/65 kA Interrupt, E150 Frame, LI/Non-Interchangeable Thermal Magnetic Trip, 3 Pole, 3 ph, Pivot/Toggle Handle Actuator, Load Lug, 10 to 8 AWG Wire, 10 to 50 deg C, 4-1/8 in W x 3-3/8 in D x 6-5/16 in H, Plastic
The E150 product line consists of thermal magnetic circuit breakers, magnetic circuit breakers and molded case switches rated up to 150 A and 600 VAC. catalog numbers include the complete breaker or switch. the WL catalog number suffix indicates that the devices come with copper aluminum line and load lugs.
Attributes
Features
- Molded case is molded from high mechanical and high dielectric strength engineered plastic
- Trip indication is shown by handle position midway between ON and off to reset the trip mechanism, move the handle to extreme off then to ON position
- Quick-make, quick-break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position
- Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in ON position
- VERIFIER™ "twist-to-trip" and ''push-to-trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle
- Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates
- Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life
- Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs
- UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight in wiring
- Proven reliability
- Provide cost effective solutions
- Multiple types to fit in your application
- 10 kA at 125 VDC, 10 kA at 250 VDC, 25 kA at 277 VAC, 25 kA at 480 VAC, 65 kA at 120/240 VAC, 65 kA at 240 VAC interrupt rating