BELIMO AFRB24-SR SPRING RETURN CONTROL ACTUATOR
Product Details
Attributes
Features
Resources
BELIMO® Valve Actuator, 0.5 mA, 24 VAC/VDC, 50/60 Hz, VA Rating: 8.5 VA, 3 ft, 18 AWG Appliance Cable with 1/2 in Conduit Connector Electrical Connection, 5.5 W, 3 W Power Consumption, 95 s Motor, <20 s Fail Safe Running s Timing Range, 180 in-lb Torque, 100 kOhm Input Impedance, 45 dBA Noise Level, NEMA 2, IP54 Enclosure, 90 deg Rotation Angle, Modulating Signal Type, Maintenance-Free Service, Plastic/Steel Body, Galvanized, -40 to 176 deg F
New AF and NF spring return actuators provide more features in a smaller housing, about 25% smaller. Low power consumption, increased torque to 90 in-lb (50% more compared to original NF Series) and 180 in-lb (35% more compared to the original AF Series) and faster running times (with MFT technology) offer new solutions for control dampers, control valves and retrofit applications.
- Mechanical position indication
- Electronic throughout 0 to 95 deg rotation overload protection
- Selectable by CCW/CW mounting direction of motion motor
- Reversible with CW/CCW mounting direction of motion fail safe
- 5 mm hex crank (3/16 in Allen) manual override
- Smaller housing for tight spaces and easier handling
- Faster motor run times with MFT technology 70 s with new AF and 40 s with new NF
- Universal power supply (for on/off models) can accept 24 to 240 VAC offering you one actuator for all voltage
- Manual override is now standard on all models for faster installation and easier servicing
Product Details
BELIMO® Valve Actuator, 0.5 mA, 24 VAC/VDC, 50/60 Hz, VA Rating: 8.5 VA, 3 ft, 18 AWG Appliance Cable with 1/2 in Conduit Connector Electrical Connection, 5.5 W, 3 W Power Consumption, 95 s Motor, <20 s Fail Safe Running s Timing Range, 180 in-lb Torque, 100 kOhm Input Impedance, 45 dBA Noise Level, NEMA 2, IP54 Enclosure, 90 deg Rotation Angle, Modulating Signal Type, Maintenance-Free Service, Plastic/Steel Body, Galvanized, -40 to 176 deg F
New AF and NF spring return actuators provide more features in a smaller housing, about 25% smaller. Low power consumption, increased torque to 90 in-lb (50% more compared to original NF Series) and 180 in-lb (35% more compared to the original AF Series) and faster running times (with MFT technology) offer new solutions for control dampers, control valves and retrofit applications.
Attributes
Features
- Mechanical position indication
- Electronic throughout 0 to 95 deg rotation overload protection
- Selectable by CCW/CW mounting direction of motion motor
- Reversible with CW/CCW mounting direction of motion fail safe
- 5 mm hex crank (3/16 in Allen) manual override
- Smaller housing for tight spaces and easier handling
- Faster motor run times with MFT technology 70 s with new AF and 40 s with new NF
- Universal power supply (for on/off models) can accept 24 to 240 VAC offering you one actuator for all voltage
- Manual override is now standard on all models for faster installation and easier servicing