EXM 5412 ESS241606 WATER / OIL / DUST TIGHT SS ENCLOSURE
Product Details
Attributes
Features
Resources
exm® Enclosure, Series: 5412 ESS Series, Quarter-Turn Locking, 12, NEMA 4X, IP66 IP Rating, Wall Mount, 304 Stainless Steel, Smooth Brushed/Galvanized, 16 in Width, 24 in Height, 6 in D
The 5412 ESS water, oil and dust tight enclosures are used indoors or outdoors, in areas where a corrosion problem exists or where the enclosures may be subject to housing or water coming from any direction or for protection against dust, dirt or oil splashing. The 5412 ESS are made of high-quality 14 or 16 ga (type 304) stainless steel, with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A high-quality, robotically poured-in-place, seamless gasket ensures a complete and durable water tight seal. The pins of the concealed hinges can be pulled out to remove the door. A 1/4-turn locking mechanism (or 3-point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 ga galvanized inner panel, which is double bent for maximum rigidity and mounts on M8 welded studs. The enclosures exterior is unpainted and brushed smooth. Inner panel is galvanized.
- Large door bend adds rigidity
- Double bent panel increases rigidity
- Included door rails increase rigidity and add mounting capability
- Large drip shield protects contents and adds rigidity
- Seams are continuously welded and ground smooth
- Aesthetic and convenient heavy-duty die-cast hinges allow 180 deg opening
- 1/4-turn lock allows easy access
- Seamless poured in place gasket
- Anti-vibration flange nuts
Product Details
exm® Enclosure, Series: 5412 ESS Series, Quarter-Turn Locking, 12, NEMA 4X, IP66 IP Rating, Wall Mount, 304 Stainless Steel, Smooth Brushed/Galvanized, 16 in Width, 24 in Height, 6 in D
The 5412 ESS water, oil and dust tight enclosures are used indoors or outdoors, in areas where a corrosion problem exists or where the enclosures may be subject to housing or water coming from any direction or for protection against dust, dirt or oil splashing. The 5412 ESS are made of high-quality 14 or 16 ga (type 304) stainless steel, with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A high-quality, robotically poured-in-place, seamless gasket ensures a complete and durable water tight seal. The pins of the concealed hinges can be pulled out to remove the door. A 1/4-turn locking mechanism (or 3-point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 ga galvanized inner panel, which is double bent for maximum rigidity and mounts on M8 welded studs. The enclosures exterior is unpainted and brushed smooth. Inner panel is galvanized.
Attributes
Features
- Large door bend adds rigidity
- Double bent panel increases rigidity
- Included door rails increase rigidity and add mounting capability
- Large drip shield protects contents and adds rigidity
- Seams are continuously welded and ground smooth
- Aesthetic and convenient heavy-duty die-cast hinges allow 180 deg opening
- 1/4-turn lock allows easy access
- Seamless poured in place gasket
- Anti-vibration flange nuts