Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
LEVITON L8504-100 0.75-0.99 BUS DROP
Product Details
Attributes
Features
Resources
Leviton® Wire Mesh Pulling Grip, Single Weave Junior Duty Standard, 0.75 to 0.99 in Dia Cable, Closed Mesh, 10 in Mesh Length, Flexible Eye, 820 lb Load, Galvanized Steel
Leviton® Wire Mesh Safety Grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® Wire Mesh Safety Grips are flexible holding devices used to pull cable, rope, or tubing into place; to support it after it has been installed, to prevent cable pullout; or to provide strain-relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
- For pulling bare conductors, insulated wires, synthetic rope, wire rope and fiber optic cable
- These grips do not damage the cable, as the tension remains uniform throughout the length of the grip
- The mesh responds to fit either a single cable or a bundle of cables
- Pulling grips may be used for pulling cable on overhead or underground applications, for stringing service or communication lines into factories, for pulling wire through conduit and for underground electrical pulls
- Pulling grips are woven in galvanized steel for greater strength and longer life
Product Details
Leviton® Wire Mesh Pulling Grip, Single Weave Junior Duty Standard, 0.75 to 0.99 in Dia Cable, Closed Mesh, 10 in Mesh Length, Flexible Eye, 820 lb Load, Galvanized Steel
Leviton® Wire Mesh Safety Grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® Wire Mesh Safety Grips are flexible holding devices used to pull cable, rope, or tubing into place; to support it after it has been installed, to prevent cable pullout; or to provide strain-relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Attributes
Features
- For pulling bare conductors, insulated wires, synthetic rope, wire rope and fiber optic cable
- These grips do not damage the cable, as the tension remains uniform throughout the length of the grip
- The mesh responds to fit either a single cable or a bundle of cables
- Pulling grips may be used for pulling cable on overhead or underground applications, for stringing service or communication lines into factories, for pulling wire through conduit and for underground electrical pulls
- Pulling grips are woven in galvanized steel for greater strength and longer life