Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
LEVITON ODS15-IDW DECORA 120/277V 180DEG OCCUPENCY SENSOR SWITCH WHITE
Product Details
Attributes
Features
Resources
Leviton®, ODS15-IDW, Wall Mount Occupancy Sensor With Self-Adaptive Technology, 1-Pole Low Profile Photocell Controlled Single Relay, 120/230/277 V AC, 100/280 mW Power, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Time Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Auto Control Output, Wall Mounting, 32 to 122 deg F, White, 46 in H x 1.75 in W x 1.83 in D Dimensions
The ODS15 uses passive Infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. The lights will remain ON as long as there is an occupant moving through the sensor zones.
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive scanning-device look
- Convenient pushbutton provides manual ON/off light switching at any time
- Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Segmented fresnel lens provides optimum sensitivity and performance, designed with an extensive minor motion area where even slight body movements will be detected
- Vandal-resistant PIR lens, one unit can be used for 120 through 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto off mode for installations where manual ON switching is required but auto Off switching is still desired for CEC title 24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 s (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Light sensor adjustable ambient light override ranges from approximately 20 LUX to 5000+ LUX to prevent lights from turning on automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold off feature once level has been set, no neutral design is optional for retrofit applications
- Self adjusting delayed off time interval compensates for real time occupancy patterns, preventing unnecessary ON/off switching
- Exclusive walk through feature provides increased energy savings by not leaving the lights On for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the relay turns off, a 30 s vacancy confirmation exists to turn the relays back On
- False detection circuitry
- Presentation mode feature for slide or film presentations, allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- Additional manual service switch provided for installer to force lights to hold off or hold on during installation
- Beep warn unit beeps 3 times after delayed off time expires, then waits 10 s before turning lights Off
- Exclusive Leviton® high inrush stability(HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
Product Details
Leviton®, ODS15-IDW, Wall Mount Occupancy Sensor With Self-Adaptive Technology, 1-Pole Low Profile Photocell Controlled Single Relay, 120/230/277 V AC, 100/280 mW Power, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Time Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Auto Control Output, Wall Mounting, 32 to 122 deg F, White, 46 in H x 1.75 in W x 1.83 in D Dimensions
The ODS15 uses passive Infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. The lights will remain ON as long as there is an occupant moving through the sensor zones.
Attributes
Features
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive scanning-device look
- Convenient pushbutton provides manual ON/off light switching at any time
- Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Segmented fresnel lens provides optimum sensitivity and performance, designed with an extensive minor motion area where even slight body movements will be detected
- Vandal-resistant PIR lens, one unit can be used for 120 through 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto off mode for installations where manual ON switching is required but auto Off switching is still desired for CEC title 24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 s (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Light sensor adjustable ambient light override ranges from approximately 20 LUX to 5000+ LUX to prevent lights from turning on automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold off feature once level has been set, no neutral design is optional for retrofit applications
- Self adjusting delayed off time interval compensates for real time occupancy patterns, preventing unnecessary ON/off switching
- Exclusive walk through feature provides increased energy savings by not leaving the lights On for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the relay turns off, a 30 s vacancy confirmation exists to turn the relays back On
- False detection circuitry
- Presentation mode feature for slide or film presentations, allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- Additional manual service switch provided for installer to force lights to hold off or hold on during installation
- Beep warn unit beeps 3 times after delayed off time expires, then waits 10 s before turning lights Off
- Exclusive Leviton® high inrush stability(HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service