content loaded
LIBERTY 405-LTS Image 1

LIBERTY 405-LTS HI HD SUMP PUMP W/LG SWITCH .5HP 115V 2 DISC

MFR Part #: 405-LTS
SKU #: 1164761
Brand: Liberty Pumps®
UPC: 671812136180
Liberty Pumps® 405-LTS 405, 48 gpm at 5 ft Head Flow Rate, 2 in FNPT Inlet x 2 in FNPT Outlet, 1 Phase , 1/2 hp, Polypropylene
Piggyback Style Plug
Laundry Trays, Commercial Sinks, Mop Sinks, Bar Sinks, Water Softener, Dehumidifiers, Wherever Gray and Wastewater Drainage Is Needed Below Gravity Lines
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birthdefects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Liberty Pumps®, 405-LTS, High Temperature Fully Automatic, Series: 405, 48 gpm at 5 ft Head Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 V AC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous Duty, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions

Liberty's 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. QuickTree® technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.

Product Details

Liberty Pumps®, 405-LTS, High Temperature Fully Automatic, Series: 405, 48 gpm at 5 ft Head Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 V AC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous Duty, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions

Liberty's 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. QuickTree® technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.

Attributes

Country Of Origin: US
Flow Rate: 48 gpm at 5 ft Head
Horsepower: 1/2 hp
Voltage Rating: 115 V AC
Amperage Rating: 7.3 A
Bearing Type: Sealed
Cord Type: SJTOOW 10 ft
Dimensions: 13-3/4 in W x 14-1/8 in H
Frequency Rating: 60 Hz
Impeller Type: Vortex High Temperature Engineered Polymer
Inlet Size: 2 in FNPT
Material: Polypropylene
Maximum Head: 34 ft
Motor Speed: 3450 rpm
Outlet Size: 2 in FNPT
Phase: 1
Series: 405
Temperature Rating: 180 deg Continuous Duty
Type: High Temperature Fully Automatic

Features

  • QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
  • Oil filled, hermetically sealed motor with thermal-overload protection, 10 ft, 3 wire power cord with grounded plug
  • Corrosion-resistant polyolefin basin with molded in connections
  • Maintenance-free, permanently lubricated sealed bearings
  • 3/8 in solid handling
  • Pre-assembled and ready to install
  • Separate access cover for easy switch inspection
  • Integrally molded rubber gasket for a superior gas-tight seal

Resources

Instruction/Installation Manual
Specification Sheet