content loaded
LIBERTY LEH202M3-2 Image 1

LIBERTY LEH202M3-2 SUBMERSIBLE SEWAGE PUMP 2HP 25FT CORD 230V

MFR Part #: LEH202M3-2
SKU #: 1154583
Brand: Liberty Pumps®
UPC: 671812131901
Liberty Pumps® LEH202M3-2 LEH200, 2 hp, 230 VAC, 3 in Flanged Outlet, Cast Iron, 18 A Full Load/53 A Locked Rotor, 1 Phase
3 Years Limited
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Liberty Pumps®, LEH202M3-2, High-Head Manual, Series: LEH200, 200 gpm Flow Rate, 3 in Flanged Outlet, 83 ft Maximum Head, 2 hp, 230 VAC, 18 A Full Load/53 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, 1 Service Factor, Cast Iron 2-Vane Enclosed Impeller, 135 deg C Thermal Overload, Ball Bearing, Cast Iron, 13 in W x 21 in H Dimensions

The LEH200 by Liberty is a high-head 2 in solids-handling sewage pump. The LEH200 features Liberty's unique one-piece cast iron body and quick-disconnect cords in 25 ft standard length. Available in 2 or 3 in flanged discharge and a variety of voltages, the LEH200 has a maximum head of 83 ft and is backed by Liberty's 3 years warranty.

Product Details

Liberty Pumps®, LEH202M3-2, High-Head Manual, Series: LEH200, 200 gpm Flow Rate, 3 in Flanged Outlet, 83 ft Maximum Head, 2 hp, 230 VAC, 18 A Full Load/53 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, 1 Service Factor, Cast Iron 2-Vane Enclosed Impeller, 135 deg C Thermal Overload, Ball Bearing, Cast Iron, 13 in W x 21 in H Dimensions

The LEH200 by Liberty is a high-head 2 in solids-handling sewage pump. The LEH200 features Liberty's unique one-piece cast iron body and quick-disconnect cords in 25 ft standard length. Available in 2 or 3 in flanged discharge and a variety of voltages, the LEH200 has a maximum head of 83 ft and is backed by Liberty's 3 years warranty.

Attributes

Country Of OriginUS
Horsepower2 hp
Maximum Head83 ft
Outlet Size3 in Flanged
TypeHigh-Head Manual
Voltage Rating230 VAC
Amperage Rating18 A Full Load/53 A Locked Rotor
Bearing TypeBall
Cord TypeSJOOW 25 ft
Dimensions13 in W x 21 in H
Flow Rate200 gpm
Frequency Rating60 Hz
Impeller TypeCast Iron 2-Vane Enclosed
MaterialCast Iron
Motor Speed3450 rpm
Phase1
SeriesLEH200
Service Factor1
Temperature Rating135 deg C Thermal Overload

Features

  • Cast iron housing and volute
  • Oil filled, hermetically sealed motor
  • 303 stainless steel rotor shaft
  • Permanently lubricated upper and lower ball bearings
  • Dual shaft seals
  • Quick connect 25 ft power cord
  • Built-in thermal protection on 1-phase models
  • 2 in solid handling