content loaded
MASTERS ABS4L-1 Image 1

MASTERS ABS4L-1 ABS-PRO MEDIUM YELLOW CEMENT 3.78L

MFR Part #:Ā ABS4L-1
SKU #:Ā 1237191
Brand:Ā Oatey | MASTERSĀ®
UPC:Ā 067001022431
MASTERSĀ® ABS4L-1 Medium Body Cement, 3.78 L Container, Yellow, For Use With On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Non-Pressure Applications
CSA B181.1 | ASTM D2235 | NSF 14 for DWV and Sewer | APMO Listed | Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements

MASTERSĀ®, ABS4L-1, Cement, Medium Body, 3.78 L Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F

Product Details

MASTERSĀ®, ABS4L-1, Cement, Medium Body, 3.78 L Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F

Attributes

Container Size:Ā 3.78 L
Type:Ā Medium Body
Color:Ā Yellow
Composition:Ā Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone/Cyclohexanone/Acetone
Odor/Scent:Ā Solvent
Setting Time:Ā 5 to 6, 3 to 4, 1 to 2 min
Suitable For Use With:Ā On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Temperature Rating:Ā 40 to 110 deg F

Features

  • Cut pipe ends square chamfer and clean pipe ends
  • Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
  • Use a suitable applicator at least 1/2 the size of the pipe diameter
  • Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
  • Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
  • Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
  • Apply a second coat of cement to the pipe
  • Assemble parts quickly as cement must be in a fluid state when joining
  • Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
  • Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
  • Wipe off excess cement for a clean esthetic appearance
  • Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping