content loaded
OATEY TR500-W Image 1

OATEY TR500-W MASTERS TRANSITION PVC ABS WHT CEMENT 473ML

MFR Part #:Ā TR500-W
SKU #:Ā 1239795
Brand:Ā Oatey | MASTERSĀ®
UPC:Ā 067001022486
MASTERSĀ® TR500-W Medium Body Cement, 473 mL Container, White, For Use With On joining ABS to PVC in non-pressure transition joints up to 6 in dia
ABS to PVC in Non-Pressure Applications
ASTM D-3138 | NSF 14 for PW DWV and Sewer | IAPMO Listed | UL Greenguard Gold | ANSI 61 health effects requirements | Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements

MASTERSĀ®, TR500-W, Cement, Medium Body, 473 mL Container, For Use With: On joining ABS to PVC in non-pressure transition joints up to 6 in dia, White, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F

Product Details

MASTERSĀ®, TR500-W, Cement, Medium Body, 473 mL Container, For Use With: On joining ABS to PVC in non-pressure transition joints up to 6 in dia, White, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F

Attributes

Container Size:Ā 473 mL
Color:Ā White
Composition:Ā Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Odor/Scent:Ā Solvent
Suitable For Use With:Ā On joining ABS to PVC in non-pressure transition joints up to 6 in dia
Temperature Rating:Ā 40 to 110 deg F
Type:Ā Medium Body

Features

  • Cut pipe ends square chamfer and clean pipe ends
  • Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
  • Use a suitable applicator at least 1/2 the size of the pipe diameter
  • Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
  • Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
  • Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
  • Apply a second coat of cement to the pipe
  • Assemble parts quickly as cement must be in a fluid state when joining
  • Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
  • Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
  • Wipe off excess cement for a clean esthetic appearance
  • Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping

Resources