Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
WATERGROUP 82519-1 WG189UFHEDP-200 2CUFT 224GAL DUAL TANK UPFLOW WATER SOFTNER
Product Details
Attributes
Features
Resources
WaterGroup® Water Softener, WG 189UFHEDP Series, 420 lb Salt Storage, 75 Grains/gal Water Hardness, 30 to 125 psi, 11.9 gpm Flow Rate, Neoprene, 64 x 26 in
Designed to soften extremely hard water (>75 gpg), the 189UFHEDP's dual-tank system offers a more cost-effective solution than larger single-tank systems. Featuring 1" porting, the HEDP's first resin tank significantly reduces water hardness and the second tank acts as a 'polisher' to prevent hard water slippage. The HEDP's high-efficiency technology uses less salt while supplying consistent soft water.
- Upflow Regeneration: Saves salt by preserving the unused portion of the softening bed from unnecessary ion exchange
- Precision Brining: Calculates the exact amount of brine required to regenerate, using up to 30% less salt
- Automatic System Refresh: If no water is used for seven (7) days, the system will perform an automatic refresh to prevent bacteria growth
- Backwash Frequency Preset: Save water each regeneration by skipping up to ten (10) backwash cycles on clean municipal water supply
- Soft Water Brine Tank Refill: Keeps tank & injectors clean
- Soft Water Recharge: If capacity goes below 3%, an automatic 15-minute recharge restores softening until the next regeneration
- Tank Features: Brine tank with safety float, air check and injection molded brine grid to reduce bridging. Moisture wicking neoprene tank jacket included on all pressure tanks
Product Details
WaterGroup® Water Softener, WG 189UFHEDP Series, 420 lb Salt Storage, 75 Grains/gal Water Hardness, 30 to 125 psi, 11.9 gpm Flow Rate, Neoprene, 64 x 26 in
Designed to soften extremely hard water (>75 gpg), the 189UFHEDP's dual-tank system offers a more cost-effective solution than larger single-tank systems. Featuring 1" porting, the HEDP's first resin tank significantly reduces water hardness and the second tank acts as a 'polisher' to prevent hard water slippage. The HEDP's high-efficiency technology uses less salt while supplying consistent soft water.
Attributes
Features
- Upflow Regeneration: Saves salt by preserving the unused portion of the softening bed from unnecessary ion exchange
- Precision Brining: Calculates the exact amount of brine required to regenerate, using up to 30% less salt
- Automatic System Refresh: If no water is used for seven (7) days, the system will perform an automatic refresh to prevent bacteria growth
- Backwash Frequency Preset: Save water each regeneration by skipping up to ten (10) backwash cycles on clean municipal water supply
- Soft Water Brine Tank Refill: Keeps tank & injectors clean
- Soft Water Recharge: If capacity goes below 3%, an automatic 15-minute recharge restores softening until the next regeneration
- Tank Features: Brine tank with safety float, air check and injection molded brine grid to reduce bridging. Moisture wicking neoprene tank jacket included on all pressure tanks