Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
EATON 10250T462 2-POSITION LATCHED PUSHBUTTON JOYSTICK OPERATOR
Product Details
Attributes
Features
Resources
EATON Joystick Operator, Heavy Duty Oil/Watertight, Series: 10250T, 30.5 mm Size, Momentary Contact Mode, 2 Positions, NEMA 3/3R/4/4X/12/13 Enclosure, 1 to 150 deg F
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
- The device mounts in the standard 30.5 mm mounting hole
- Allow sufficient panel space for lever movement
- The maximum travel of the knob operator (full up to full down) is 2.2 in (24 deg) momentary, 2-1/2 in (30 deg) maintained, but ample space for lever operation must be allowed
- These operators are field convertible from momentary to maintained operation or vice versa
- The use of NC contacts is preferred because they provide positive drive contact opening and a direct relationship between lever movement and affected terminal, up movement affects the top terminals
- Without overcurrent latch
Product Details
EATON Joystick Operator, Heavy Duty Oil/Watertight, Series: 10250T, 30.5 mm Size, Momentary Contact Mode, 2 Positions, NEMA 3/3R/4/4X/12/13 Enclosure, 1 to 150 deg F
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
Attributes
Features
- The device mounts in the standard 30.5 mm mounting hole
- Allow sufficient panel space for lever movement
- The maximum travel of the knob operator (full up to full down) is 2.2 in (24 deg) momentary, 2-1/2 in (30 deg) maintained, but ample space for lever operation must be allowed
- These operators are field convertible from momentary to maintained operation or vice versa
- The use of NC contacts is preferred because they provide positive drive contact opening and a direct relationship between lever movement and affected terminal, up movement affects the top terminals
- Without overcurrent latch