LUTRON DVSTV-WH LED DIMMER W/BUILT-IN POWER PACK 0-10V
Product Details
Attributes
Features
Resources
Lutron®, DVSTV-WH, Dimmer Switch, 3-Way, Series: Diva®, 120 to 277 V AC, 8 A/50 mA, 50/60 Hz Frequency, 1 Pole, Fluorescent/LED Lamp, Preset Start, Operation Mode: On/Off, Current Sink/Linear Slide/Paddle Control, Class 1 Insulation, NEMA 4/10 Enclosure, Wall Mounting, Screw Terminal, 0 to 40 deg C, Plastic, White, 4.69 in H x 2.94 in W x 1.31 in D Dimensions
The Diva 0-10V dimmer switch is a simple solution is designed to match existing design style switches and accessories. Easily turn the lights on and off with a paddle switch, and use the slide control to adjust the lights to the perfect level. The new Diva 0 - 10-Volt dimmerswitch is a 0-10 VDC dimmer with 3-way functionality for 3rd party 0-10-Volt fixtures (LED and fluorescent), no separate power pack required. Coordinating wall plate sold separately.
- Power failure memory should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored
- Easily replaces existing switch and installs in as little as 15 min (no neutral wire required)
- Patented switching technology extends product lifetime
- 0-10 V control link controls third party fixtures
- Precise color matching
- Full family of products for most lighting sources
- Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver loads of 8 A steady state current
- Control provides dimming signal only
- Gloss finish
- Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate
- For indoor use only
- Dimmers feature built-in soft glow nightlight
- Adjustable high-end and low end trim for optimal dimming performance
Product Details
Lutron®, DVSTV-WH, Dimmer Switch, 3-Way, Series: Diva®, 120 to 277 V AC, 8 A/50 mA, 50/60 Hz Frequency, 1 Pole, Fluorescent/LED Lamp, Preset Start, Operation Mode: On/Off, Current Sink/Linear Slide/Paddle Control, Class 1 Insulation, NEMA 4/10 Enclosure, Wall Mounting, Screw Terminal, 0 to 40 deg C, Plastic, White, 4.69 in H x 2.94 in W x 1.31 in D Dimensions
The Diva 0-10V dimmer switch is a simple solution is designed to match existing design style switches and accessories. Easily turn the lights on and off with a paddle switch, and use the slide control to adjust the lights to the perfect level. The new Diva 0 - 10-Volt dimmerswitch is a 0-10 VDC dimmer with 3-way functionality for 3rd party 0-10-Volt fixtures (LED and fluorescent), no separate power pack required. Coordinating wall plate sold separately.
Attributes
Features
- Power failure memory should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored
- Easily replaces existing switch and installs in as little as 15 min (no neutral wire required)
- Patented switching technology extends product lifetime
- 0-10 V control link controls third party fixtures
- Precise color matching
- Full family of products for most lighting sources
- Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver loads of 8 A steady state current
- Control provides dimming signal only
- Gloss finish
- Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate
- For indoor use only
- Dimmers feature built-in soft glow nightlight
- Adjustable high-end and low end trim for optimal dimming performance