LUTRON MS-OPS5M-WH MAESTRO 120V 5A IN-WALL OCC/VAC SENS WHT
Product Details
Attributes
Features
Resources
Lutron®, MS-OPS5M-WH, Occupancy Sensing Switch, 1-Pole Multi-Location, Series: Maestro®, 120 VAC, 5 A, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Time Delay, ELV/Fluorescent/Halogen/Incandescent/LED/MLV Lamp, 50/60 Hz Response, Ground Connection, Manual On/Automatic Off/Automatic On/Automatic Off Control Output, NEMA WD7 Enclosure, 32 to 104 deg F, White, 4-11/16 in H x 2-15/16 in W x 1-1/8 in D Dimensions
Coordinating Claro Wall plate and Accessories sold separately. Let Lutron's Maestro Occupancy Sensor switch turn the lights or fan on and off for you. It's a simple, easy and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights/fan turn on when you enter the room and then turn off automatically after you leave. This sensor features XCT Sensing Technology which detects minor motion, such as typing at a desk or reading, ensuring sensor does not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install a sensor in your bedroom so lights aren't left on mistakenly or in the bathroom for your exhaust fan. This Maestro Sensor works with any bulb type, including CFLs and LEDs or fans up to 3 Amp. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.
- Single pole, multilocation/3-way
- Up to 30 x 30 ft (9 x 9 m) 900 sq-ft (81 sq-m) major motion coverage and 20 x 20 ft (6 x 6 m) 400 sq-ft (36 sq-m) minor motion coverage
- Clamshell packaging
- Crush/tamper resistant lens
- Automatically turns the lights on when you enter the room and off when you leave
- 0 to 90 Percent humidity non-condensing, indoor use only
- Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
- Optional senses daylight so lights do not turn on when there is enough natural light in the room
- Smart ambient light detection
- Lutron® patented Softswitch®
- Off-state power
- Passive infrared sensors with exclusive Lutron® XCTTM Technology for fine motion detection
- Adjustable timeout (1 min, 5 min, 15 min or 30 min) and high/low sensitivity adjustment
- Works with all bulb types, up to 600W incandescent, halogen and electronic low-voltage, 450W magnetic low-voltage, 360W CFL/LED, 5 ballasts, 3A fans
- Adaptive switching algorithm for extended relay life
- Occupancy version can be set to auto-on/auto-off or manual-on/auto-off
- Programmable time-out of lights - 1, 5, 15 or 30 min
Product Details
Lutron®, MS-OPS5M-WH, Occupancy Sensing Switch, 1-Pole Multi-Location, Series: Maestro®, 120 VAC, 5 A, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Time Delay, ELV/Fluorescent/Halogen/Incandescent/LED/MLV Lamp, 50/60 Hz Response, Ground Connection, Manual On/Automatic Off/Automatic On/Automatic Off Control Output, NEMA WD7 Enclosure, 32 to 104 deg F, White, 4-11/16 in H x 2-15/16 in W x 1-1/8 in D Dimensions
Coordinating Claro Wall plate and Accessories sold separately. Let Lutron's Maestro Occupancy Sensor switch turn the lights or fan on and off for you. It's a simple, easy and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights/fan turn on when you enter the room and then turn off automatically after you leave. This sensor features XCT Sensing Technology which detects minor motion, such as typing at a desk or reading, ensuring sensor does not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install a sensor in your bedroom so lights aren't left on mistakenly or in the bathroom for your exhaust fan. This Maestro Sensor works with any bulb type, including CFLs and LEDs or fans up to 3 Amp. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.
Attributes
Features
- Single pole, multilocation/3-way
- Up to 30 x 30 ft (9 x 9 m) 900 sq-ft (81 sq-m) major motion coverage and 20 x 20 ft (6 x 6 m) 400 sq-ft (36 sq-m) minor motion coverage
- Clamshell packaging
- Crush/tamper resistant lens
- Automatically turns the lights on when you enter the room and off when you leave
- 0 to 90 Percent humidity non-condensing, indoor use only
- Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
- Optional senses daylight so lights do not turn on when there is enough natural light in the room
- Smart ambient light detection
- Lutron® patented Softswitch®
- Off-state power
- Passive infrared sensors with exclusive Lutron® XCTTM Technology for fine motion detection
- Adjustable timeout (1 min, 5 min, 15 min or 30 min) and high/low sensitivity adjustment
- Works with all bulb types, up to 600W incandescent, halogen and electronic low-voltage, 450W magnetic low-voltage, 360W CFL/LED, 5 ballasts, 3A fans
- Adaptive switching algorithm for extended relay life
- Occupancy version can be set to auto-on/auto-off or manual-on/auto-off
- Programmable time-out of lights - 1, 5, 15 or 30 min