Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
APPLETON APPEYM75 3/4 EXP PROOF SEALING UNILET
MFR Part #: APPEYM75
SKU #: 1245306
Brand: Appleton®
UPC: 78138113537
Appleton® APPEYM75 EY Conduit Sealing Fitting, 3/4 in, For Use With IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple-Coated
NEC/CEC Certified Class I, Division 1 and 2, Groups A, B, C, D/Class II, Division 1 and 2, Groups E, F, G/Class III
Product Details
Attributes
Features
Resources
Appleton®, APPEYM75, Conduit Sealing Fitting, Series: EY, 3/4 in Size, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple-Coated, 4.71 in L x 1.38 in W Dimensions
Size:
3/4 in
Suitable For Use With:
IMC/Threaded Rigid Metallic Conduit
Dimensions:
4.71 in L x 1.38 in W
Finish:
Triple-Coated
Material:
Malleable Iron
Series:
EY
- Explosionproof, Dust-Ignitionproof, raintight
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Prevent pressure piling within conduit system
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit
- Seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Close radius type for sealing vertical or horizontal conduit runs
Product Details
Appleton®, APPEYM75, Conduit Sealing Fitting, Series: EY, 3/4 in Size, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple-Coated, 4.71 in L x 1.38 in W Dimensions
Attributes
Size: 3/4 in
Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
Dimensions: 4.71 in L x 1.38 in W
Finish: Triple-Coated
Material: Malleable Iron
Series: EY
Features
- Explosionproof, Dust-Ignitionproof, raintight
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Prevent pressure piling within conduit system
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit
- Seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Close radius type for sealing vertical or horizontal conduit runs