Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
TEMP CONTROLLER W/OUTDOOR RESET & END SW HONEYWELL T991F1009
MFR Part #: T991F1009
SKU #: 1009033
Brand: Honeywell
UPC: 085267100618
Honeywell T991F1009 Temperature Reset Control, 24 - 30 VAC, Configuration: SPST, Temperature Settings: 70 - 140 deg F
For V9055 90 series motors
Product Details
Attributes
Features
Resources
Honeywell Temperature Reset Control, 24 - 30 VAC, Configuration: SPST, 10 ft Indoor, 30 ft Outdoor Capillary Length, Sensing Element: Copper Bulb, 50/60 Hz, 4 deg F Addictive Differential, Temperature Settings: 70 - 140 deg F, Gray, 4-1/8 in L, 5-7/8 in H, 2-3/16 in W, 265 deg F Maximum
Color:Gray
Configuration:SPST
Frequency Rating:50/60 Hz
Height:5-7/8 in
Length:4-1/8 in
Width:2-3/16 in
- Micro-switch end switch cycles burner on and off at low fire, T991 then modulates burner as required
- Ambient compensated
- Setpoint adjustment on front of case
- Switch makes 1 deg F above end of throttling range
- Mount using 3-holes in the back of the case
- Provides on/off and modulating control of water or air temperature in ducts or tanks, setpoint automatically reset as outdoor temperature changes
- Indoor bulb temperature plus outdoor bulb temperature must not exceed operating temperature range
- Analog output - one 135 ohm potentiometer
- Analog and relay output
- 2-sensor inputs
- 11 deg F throttling range
- 1 : 1 reset ratio
Product Details
Honeywell Temperature Reset Control, 24 - 30 VAC, Configuration: SPST, 10 ft Indoor, 30 ft Outdoor Capillary Length, Sensing Element: Copper Bulb, 50/60 Hz, 4 deg F Addictive Differential, Temperature Settings: 70 - 140 deg F, Gray, 4-1/8 in L, 5-7/8 in H, 2-3/16 in W, 265 deg F Maximum
Attributes
Color: Gray
Configuration: SPST
Frequency Rating: 50/60 Hz
Height: 5-7/8 in
Length: 4-1/8 in
Width: 2-3/16 in
Features
- Micro-switch end switch cycles burner on and off at low fire, T991 then modulates burner as required
- Ambient compensated
- Setpoint adjustment on front of case
- Switch makes 1 deg F above end of throttling range
- Mount using 3-holes in the back of the case
- Provides on/off and modulating control of water or air temperature in ducts or tanks, setpoint automatically reset as outdoor temperature changes
- Indoor bulb temperature plus outdoor bulb temperature must not exceed operating temperature range
- Analog output - one 135 ohm potentiometer
- Analog and relay output
- 2-sensor inputs
- 11 deg F throttling range
- 1 : 1 reset ratio