AQUATRIP AT401D PVC 1IN HARDWIRED LEAK DETECTION SYSTEM
Product Details
Attributes
Features
Resources
AQUATRIP® Deluxe Hard Wired Leak Detection System, Model: AT401, 1 in Nominal, BSP, NPT Connection, 10 to 150 psi, 0 to 22.2 gpm Flow Rate, Patented Leak Sensor, PVC Body, 33 to 122 deg F, 84 in L x 77 in W x 179 in H
The AT401 is a programmable leak detection system with an integrated automatic shut-off valve. It is designed to detect leaks and thus help to minimize water damage, reduce water bills and stop water wastage. It will constantly monitor all the plumbing pipes, fittings and water using appliances on the property and like a trip switch, will shut-off the water automatically if a tap, fitting, pipe, joint, toilet cistern or appliance is leaking or left running. It can detect the difference between your normal water use and a plumbing leak or tap left running by mistake and alert you to the plumbing problems as they occur, which you may otherwise be unaware of. The AT401 is uses a sleek wall-mount control panel from which the user can control nearly all the functions of the system. It is powered by a 12 V transformer with a built-in back-up battery in case of power failure. The control panel is hard wired to the shut-off valve, which can be installed above or below ground or inside the building, basement or machine room. It has advanced protection features such as home/away mode, night watch, smart-auto away sensing, system self-testing protocols and sleep modes so that you can still run your irrigation without triggering the system. Its can also connect to an existing alarm system to trigger the alarm to notify your security monitoring service if a leak occurs. Its low cost and simple installation and operation make it perfect for use in apartments or residential houses alike, where it can provide silent, invisible and automatic plumbing protection.
- Patented leak sensor with integrated shut-off valve, shut-off water once leak is detected
- Fast test facility allows rapid check of system functions
- System check function assists in quick identification of leaks when detected
- Leak detection sensing system has peak/off water usage modes to enhance detection capability's
- Early warning indicator warns user before water is shut-off prevents water turning off unexpectedly
- Wall-mount control panel to easily program and control the system
- Home/away modes for increased leak detection protection
- Nightwatch mode for increased overnight leak detection sensitivity
- Programmable exclusion period disables flow monitoring during sleep mode
- Output to trigger a house alarm or GSM dialer or building management system
- Temporary system override from control panel for occasional longer than normal water usage
- Emergency manual override if the system needs to be turned off for a longer period of time
- Water flow indicator on control panel
- Water can be shut-off from control panel, no need to access the incoming main tap
- System has built-in self monitoring protocol to check and maintain functionality
- Replaceable mesh filter protects units from debris in water supply
- Accessory port may allow connection of movement sensors, reset switches or water meter input signal
- Can display real-time water consumption and cost if able to be connected to the existing water meter
Product Details
AQUATRIP® Deluxe Hard Wired Leak Detection System, Model: AT401, 1 in Nominal, BSP, NPT Connection, 10 to 150 psi, 0 to 22.2 gpm Flow Rate, Patented Leak Sensor, PVC Body, 33 to 122 deg F, 84 in L x 77 in W x 179 in H
The AT401 is a programmable leak detection system with an integrated automatic shut-off valve. It is designed to detect leaks and thus help to minimize water damage, reduce water bills and stop water wastage. It will constantly monitor all the plumbing pipes, fittings and water using appliances on the property and like a trip switch, will shut-off the water automatically if a tap, fitting, pipe, joint, toilet cistern or appliance is leaking or left running. It can detect the difference between your normal water use and a plumbing leak or tap left running by mistake and alert you to the plumbing problems as they occur, which you may otherwise be unaware of. The AT401 is uses a sleek wall-mount control panel from which the user can control nearly all the functions of the system. It is powered by a 12 V transformer with a built-in back-up battery in case of power failure. The control panel is hard wired to the shut-off valve, which can be installed above or below ground or inside the building, basement or machine room. It has advanced protection features such as home/away mode, night watch, smart-auto away sensing, system self-testing protocols and sleep modes so that you can still run your irrigation without triggering the system. Its can also connect to an existing alarm system to trigger the alarm to notify your security monitoring service if a leak occurs. Its low cost and simple installation and operation make it perfect for use in apartments or residential houses alike, where it can provide silent, invisible and automatic plumbing protection.
Attributes
Features
- Patented leak sensor with integrated shut-off valve, shut-off water once leak is detected
- Fast test facility allows rapid check of system functions
- System check function assists in quick identification of leaks when detected
- Leak detection sensing system has peak/off water usage modes to enhance detection capability's
- Early warning indicator warns user before water is shut-off prevents water turning off unexpectedly
- Wall-mount control panel to easily program and control the system
- Home/away modes for increased leak detection protection
- Nightwatch mode for increased overnight leak detection sensitivity
- Programmable exclusion period disables flow monitoring during sleep mode
- Output to trigger a house alarm or GSM dialer or building management system
- Temporary system override from control panel for occasional longer than normal water usage
- Emergency manual override if the system needs to be turned off for a longer period of time
- Water flow indicator on control panel
- Water can be shut-off from control panel, no need to access the incoming main tap
- System has built-in self monitoring protocol to check and maintain functionality
- Replaceable mesh filter protects units from debris in water supply
- Accessory port may allow connection of movement sensors, reset switches or water meter input signal
- Can display real-time water consumption and cost if able to be connected to the existing water meter