Scheduled Maintenance
www.bartlegibson.com will undergo maintenance tonight at 8:00 PM MST. Quotations and PDF generation will be unavailable during this time. For help, contact [email protected]. We apologize for the inconvenience.
content loaded
APPLETON EYM300 3 STEEL CONDUIT SEAL
MFR Part #: EYM-300
SKU #: 1260815
Brand: Appleton®
UPC: 78138113552
Appleton® UNILETS® EYM-300 Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting With Removable Nipple, 3 in, For Use With IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated
Limited
For prevent passage of gases, vapors or flames from one portion of conduit system to another
UL 886 | UL 1203 File No. E10444 | CSA C22.2 No. 30 | CSA 065181, Class I, Groups B, C, D, Class II, Groups E, F, G, Class III
Product Details
Attributes
Features
Resources
Appleton® UNILETS® Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EY Series, 3 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated, 10.37 in L x 4.13 in W
Country Of Origin:
Mexico
Size:
3 in
Dimensions:
10.37 in L x 4.13 in W
Finish:
Triple Coated
Material:
Malleable Iron
Series:
EY Series
Suitable For Use With:
IMC/Threaded Rigid Metallic Conduit
Type:
Dust-Ignitionproof Explosionproof Raintight
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius
- Chromate/epoxy powder coated/zinc electroplated finish
Product Details
Appleton® UNILETS® Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EY Series, 3 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated, 10.37 in L x 4.13 in W
Attributes
Country Of Origin: Mexico
Size: 3 in
Dimensions: 10.37 in L x 4.13 in W
Finish: Triple Coated
Material: Malleable Iron
Series: EY Series
Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
Type: Dust-Ignitionproof Explosionproof Raintight
Features
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius
- Chromate/epoxy powder coated/zinc electroplated finish