Scheduled Maintenance
Our website will be unavailable for scheduled maintenance during the following times:
• Saturday, June 28 from 7:00 PM MST to
Sunday, June 29 at 1:00 AM MST
• Monday, June 30 from 4:00 AM to 6:00 AM MST
We apologize for any inconvenience. For assistance, please contact
[email protected]
.
FIELD 4625701 24V GAS VENTER 4IN INLET PVG-100
Product Details
Attributes
Features
Resources
Field Controls Power Venter, Series: PVG, 115 VAC, 2.1 A, 145 W, 3 in, 3000 rpm, 7-1/2 in H x 7-3/4 in W x 7 in D
The indoor mounted PVG and PVO Power Venters provide an economical power venting system for gas and oil appliances. All controls are built into these units. A Vent Hood is required to terminate the vent system. We also manufacture the PVU (Universal) Power Venter for use with Oil or Gas appliances up to 300,000 Btus. It comes standard with a CK-63 Control Kit.
- Thermostat or aquastat calls for heat and starts the power venter
- The pressure switch senses sufficient air flow and allows burners to start
- The power venter draws combustion air through the system and forces gases outside through an external vent hood
- Draft hood or barometric draft control between the appliances and the power venter maintains consistent air flow
- After the thermostat is satisfied, the burner shuts down and the post purge control clears the venting system of combustion gases
- The power venter shuts down
- Thermal protection
- 60 Hz frequency
- 270 ft pipe length at 25000 Btu/hr, 100 ft pipe length at 55000 Btu/hr
Product Details
Field Controls Power Venter, Series: PVG, 115 VAC, 2.1 A, 145 W, 3 in, 3000 rpm, 7-1/2 in H x 7-3/4 in W x 7 in D
The indoor mounted PVG and PVO Power Venters provide an economical power venting system for gas and oil appliances. All controls are built into these units. A Vent Hood is required to terminate the vent system. We also manufacture the PVU (Universal) Power Venter for use with Oil or Gas appliances up to 300,000 Btus. It comes standard with a CK-63 Control Kit.
Attributes
Features
- Thermostat or aquastat calls for heat and starts the power venter
- The pressure switch senses sufficient air flow and allows burners to start
- The power venter draws combustion air through the system and forces gases outside through an external vent hood
- Draft hood or barometric draft control between the appliances and the power venter maintains consistent air flow
- After the thermostat is satisfied, the burner shuts down and the post purge control clears the venting system of combustion gases
- The power venter shuts down
- Thermal protection
- 60 Hz frequency
- 270 ft pipe length at 25000 Btu/hr, 100 ft pipe length at 55000 Btu/hr