Branch: 
Airdrie
Contact Us
About Us
Locationsmore info
Events
Careers
Showrooms
Showrooms
home
home
Brands
Services
Quick Order
Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
WATTS 0388805 Image 1

WATTS 0388805 T1450F 1/2 DUAL CONTROL

MFR Part #: 0388805
SKU #: 0464765
Brand: WATTS®
UPC: 098268025569
WATTS® 0388805 1450 Regulator and Relief Valve, 1/2 in Nominal, NPT Inlet End Style, 100 psi Pressure, Iron Body
Commercial and Residential
PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.

WATTS® Regulator and Relief Valve, Series: 1450, 1/2 in Nominal, NPT Inlet, 100 psi, 212 deg F, Iron Body

This 1/2 inch dual control regulator and relief valve is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, a tight seating check valve, diaphragm relief valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).

Product Details

WATTS® Regulator and Relief Valve, Series: 1450, 1/2 in Nominal, NPT Inlet, 100 psi, 212 deg F, Iron Body

This 1/2 inch dual control regulator and relief valve is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, a tight seating check valve, diaphragm relief valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).

Attributes

Body Material: Iron
Country Of Origin: US
End Style: NPT Inlet
Nominal Size: 1/2 in
Pressure Rating: 100 psi
Series: 1450
Temperature Rating: 212 deg F

Features

  • Tight seating check valve
  • High capacity
  • Purge lever for manual purging
  • Stainless steel strainer to protect the valve disc from fouling

Resources

Instruction/Installation Manual
Specification Sheet