Branch: 
Airdrie
Contact Us
About Us
Locationsmore info
Events
Careers
Showrooms
Showrooms
home
home
Brands
Services
Quick Order
Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
WATTS 0559135 Image 1
WATTS 0559135 Image 2
WATTS 0559135 Image 3
WATTS 0559135 Image 4
content loaded
WATTS 0559135 Image 1

WATTS 0559135 LFL70A 3/4 SWT 100-130F MIXING VALVE

MFR Part #: 0559135
SKU #: 1107327
Brand: WATTS®
UPC: 098268451931
WATTS® 0559135 LFL70A Hot Water Extender Tempering Valve, 3/4 in Nominal, Solder End Style, 150 psi Pressure, 2 gpm Flow Rate, Brass Body
Limited
Commercial, Residential, Small Domestic Water Supply Systems recommended for Tankless Heater, Water Heater and Solar Installations
ASSE Listed | FM Approved | NSF Approved | UL/ULC/USC Certified | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.

WATTS® Hot Water Extender Tempering Valve, Series: LFL70A, 3/4 in Nominal, Solder, 150 psi, 100 to 130 deg F, 2 gpm, Media: Water, Brass Body, Stainless Steel Trim, 2-3/8 in L x 4-1/8 in H

This 3/4 inch hot water extender mixing valve is designed for domestic water supply systems and recommended for lower tempered radiant heat applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, solder connections, thermostat, stainless steel springs, and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The low temperature range is 100 to 130 degrees F (38 to 54 degrees C).

Product Details

WATTS® Hot Water Extender Tempering Valve, Series: LFL70A, 3/4 in Nominal, Solder, 150 psi, 100 to 130 deg F, 2 gpm, Media: Water, Brass Body, Stainless Steel Trim, 2-3/8 in L x 4-1/8 in H

This 3/4 inch hot water extender mixing valve is designed for domestic water supply systems and recommended for lower tempered radiant heat applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, solder connections, thermostat, stainless steel springs, and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The low temperature range is 100 to 130 degrees F (38 to 54 degrees C).

Attributes

Body Material: Brass
Country Of Origin: US
Dimensions: 2-3/8 in L x 4-1/8 in H
End Style: Solder
Flow Rate: 2 gpm
Media: Water
Nominal Size: 3/4 in
Pressure Rating: 150 psi
Series: LFL70A
Temperature Rating: 100 to 130 deg F
Trim Material: Stainless Steel

Features

  • Simple maintenance thermostat assembly is easily removed and replaceable as a unit
  • Finger tip dial adjustment cap
  • Lead free brass body construction
  • Solder connections

Resources

302e177b8cf2069bae6b8e3174cd6f71fc312efa_1079.pdf
c574795ec106cf96888e0bc0e7bad4ece9adf250_1079.pdf
Catalog
Instruction/Installation Manual
Specification Sheet