Scheduled Maintenance
Our website will be unavailable for scheduled maintenance during the following times:
• Saturday, June 28 from 7:00 PM MST to
Sunday, June 29 at 1:00 AM MST
• Monday, June 30 from 4:00 AM to 6:00 AM MST
We apologize for any inconvenience. For assistance, please contact
[email protected]
.
TECHSPAN S4 #8 - #4 SOL COPPER SPLIT BOLT
Product Details
Attributes
Features
Resources
Penn-Union™ by Techspan® Split Bolt Connector, 2-Conductor Type S, Copper Plated Conductor, 8 to 4 Solid Conductor, 600 VAC, 56 in Across Flats, 165 in-lb Torque 0.128 to 0.204 in Wire Dia, 90 deg C, Copper Alloy, 1.05 in L x 0.69 in W
- Made from high strength copper alloy
- Highly resistant to corrosion and season cracking
- Under torque, this design provides high contact pressure between conductors or conductor to rebar
- Now approved for electrical power, grounding/bonding, direct burial and rebar
- Type S is for use with 2 conductors in electrical power applications, 2 conductors or conductor to rebar in grounding/bonding and direct burial applications
- Grounding, bonding and direct burial below ground splicing, tapping and bonding
- DB permanently marked on head for easier identification by inspectors
- Re-usable with proper installation practice
- Free running threads
- Pressure bar design features give assurance of high "pull-out" and a secure connection on all combination of conductors
- True hex design for position grip and assured torqueing
- 16 Sol minimum tap with one maximum main
- 3 #12 (str) 8A (Type A) maximum conductor copperweld
Product Details
Penn-Union™ by Techspan® Split Bolt Connector, 2-Conductor Type S, Copper Plated Conductor, 8 to 4 Solid Conductor, 600 VAC, 56 in Across Flats, 165 in-lb Torque 0.128 to 0.204 in Wire Dia, 90 deg C, Copper Alloy, 1.05 in L x 0.69 in W
Attributes
Features
- Made from high strength copper alloy
- Highly resistant to corrosion and season cracking
- Under torque, this design provides high contact pressure between conductors or conductor to rebar
- Now approved for electrical power, grounding/bonding, direct burial and rebar
- Type S is for use with 2 conductors in electrical power applications, 2 conductors or conductor to rebar in grounding/bonding and direct burial applications
- Grounding, bonding and direct burial below ground splicing, tapping and bonding
- DB permanently marked on head for easier identification by inspectors
- Re-usable with proper installation practice
- Free running threads
- Pressure bar design features give assurance of high "pull-out" and a secure connection on all combination of conductors
- True hex design for position grip and assured torqueing
- 16 Sol minimum tap with one maximum main
- 3 #12 (str) 8A (Type A) maximum conductor copperweld