Scheduled Maintenance
Our website will be unavailable for scheduled maintenance during the following times:
• Saturday, June 28 from 7:00 PM MST to
Sunday, June 29 at 1:00 AM MST
• Monday, June 30 from 4:00 AM to 6:00 AM MST
We apologize for any inconvenience. For assistance, please contact
[email protected]
.
LEONARD TA-300 THERMOSTATIC MIXING VALVE
Product Details
Attributes
Features
Resources
LEONARD® Thermostatic Mixing Valve, 1/2 in Nominal, 125 psi, 2 to 10 gpm Flow Rate, Bronze Body, 180 deg F, 7 in W x 7 in H x 5 in D
DURA-trol® solid bi-metal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol® is highly responsive and cannot be damaged by extremes in temperature.
- Thermostatic mixing valve can be set to the correct temperature for the application
- Locking-type temperature regulator to prevent accidental movement set for 85 deg F
- Mixing valve will close down on failure of cold water supply
- Mixing valve with special internal cold water bypass capable of 4 gpm (15 Lpm) at 30 psi (2.1 bar) upon failure of hot water supply
- Adjustable high-temperature limit stop set for 90 deg F
- Integral wall support
- Sweat 1/2 in top or bottom inlets
- Threaded 1/2 in top outlet
- Angle check stops on inlets
Product Details
LEONARD® Thermostatic Mixing Valve, 1/2 in Nominal, 125 psi, 2 to 10 gpm Flow Rate, Bronze Body, 180 deg F, 7 in W x 7 in H x 5 in D
DURA-trol® solid bi-metal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol® is highly responsive and cannot be damaged by extremes in temperature.
Attributes
Features
- Thermostatic mixing valve can be set to the correct temperature for the application
- Locking-type temperature regulator to prevent accidental movement set for 85 deg F
- Mixing valve will close down on failure of cold water supply
- Mixing valve with special internal cold water bypass capable of 4 gpm (15 Lpm) at 30 psi (2.1 bar) upon failure of hot water supply
- Adjustable high-temperature limit stop set for 90 deg F
- Integral wall support
- Sweat 1/2 in top or bottom inlets
- Threaded 1/2 in top outlet
- Angle check stops on inlets