Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
MODINE PDP250AE0130SBAN 250MBH PROPELLER UNIT HEATER
MFR Part #: PDP250AE130
SKU #: 1111095
Brand: MODINE
UPC: 046629437155
MODINE PDP250AE130 Propeller Unit Heater, 115 V, 7.75 A, 250000 Btu/hr BTU, 1 ph-Phase, Steel
10 Year
For commercial applications
ANSI Z83.8 Specified | CSA Certified | ETL Listed | UL Listed
Product Details
Attributes
Features
Resources
MODINE Propeller Unit Heater, 250000 Btu/hr, 115 V, 7.75 A, 1053 fpm, 3700 cfm CFM Rating, 1/3 hp HP Rating, 1 ph, 60 Hz, NPT, 1/2 in, Liquid Propane Gas, Natural Gas, 20 in Fan Size, 83 % Efficiency, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 1 Stage, 19 ft Mounting Height, 67 ft Heat Throw, Steel, Baked-On Polyester Powder-Coated, 50 deg F, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
Amperage Rating:
7.75 A
BTU Rating:
250000 Btu/hr
CFM Rating:
3700 cfm
Connection Size:
1/2 in
Connection Type:
NPT
Dimensions:
40-1/4 in H x 25-5/8 in W x 34-3/4 in D
Efficiency:
83 %
Fan Size:
20 in
Finish:
Baked-On Polyester Powder-Coated
Flow Rate:
1053 fpm
Frequency Rating:
60 Hz
Fuel Type:
Liquid Propane Gas, Natural Gas
Heat Throw:
67 ft
HP Rating:
1/3 hp
Ignition Type:
Intermittent Pilot
Material:
Steel
Motor Type:
PSC
Mounting Height:
19 ft
Number of Stages:
1
Phase:
1 ph
Rotational Speed:
1075 rpm
Temperature Rating:
50 deg F
Voltage Rating:
115 V
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field converted to propane, if desired
- A safety pressure switch to assure safe venting conditions
- Designed to utilize the smallest diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity
- Aluminized steel heat exchanger or burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
Product Details
MODINE Propeller Unit Heater, 250000 Btu/hr, 115 V, 7.75 A, 1053 fpm, 3700 cfm CFM Rating, 1/3 hp HP Rating, 1 ph, 60 Hz, NPT, 1/2 in, Liquid Propane Gas, Natural Gas, 20 in Fan Size, 83 % Efficiency, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 1 Stage, 19 ft Mounting Height, 67 ft Heat Throw, Steel, Baked-On Polyester Powder-Coated, 50 deg F, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
Attributes
Amperage Rating: 7.75 A
BTU Rating: 250000 Btu/hr
CFM Rating: 3700 cfm
Connection Size: 1/2 in
Connection Type: NPT
Dimensions: 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
Efficiency: 83 %
Fan Size: 20 in
Finish: Baked-On Polyester Powder-Coated
Flow Rate: 1053 fpm
Frequency Rating: 60 Hz
Fuel Type: Liquid Propane Gas, Natural Gas
Heat Throw: 67 ft
HP Rating: 1/3 hp
Ignition Type: Intermittent Pilot
Material: Steel
Motor Type: PSC
Mounting Height: 19 ft
Number of Stages: 1
Phase: 1 ph
Rotational Speed: 1075 rpm
Temperature Rating: 50 deg F
Voltage Rating: 115 V
Features
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field converted to propane, if desired
- A safety pressure switch to assure safe venting conditions
- Designed to utilize the smallest diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity
- Aluminized steel heat exchanger or burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions