Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
OATEY TR500-W MASTERS TRANSITION PVC ABS WHT CEMENT 473ML
MFR Part #: TR500-W
SKU #: 1239795
Brand: Oatey | MASTERS®
UPC: 067001022486
MASTERS® TR500-W Medium Body Cement, 473 mL Container, White, For Use With On joining ABS to PVC in non-pressure transition joints up to 6 in dia
ABS to PVC in Non-Pressure Applications
ASTM D-3138 | NSF 14 for PW DWV and Sewer | IAPMO Listed | UL Greenguard Gold | ANSI 61 health effects requirements | Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements
Product Details
Attributes
Features
Resources
MASTERS®, TR500-W, Cement, Medium Body, 473 mL Container, For Use With: On joining ABS to PVC in non-pressure transition joints up to 6 in dia, White, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Color:
White
Composition:
Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Container Size:
473 mL
Odor/Scent:
Solvent
Suitable For Use With:
On joining ABS to PVC in non-pressure transition joints up to 6 in dia
Temperature Rating:
40 to 110 deg F
Type:
Medium Body
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, TR500-W, Cement, Medium Body, 473 mL Container, For Use With: On joining ABS to PVC in non-pressure transition joints up to 6 in dia, White, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Attributes
Color: White
Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Container Size: 473 mL
Odor/Scent: Solvent
Suitable For Use With: On joining ABS to PVC in non-pressure transition joints up to 6 in dia
Temperature Rating: 40 to 110 deg F
Type: Medium Body
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping