Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
OATEY PR500-C MASTERS PRIMER-PRO CLEAR PRIMER 473ML
MFR Part #: PR500-C
SKU #: 1239920
Brand: Oatey | MASTERS®
UPC: 67001022509
MASTERS® PR500-C Primer, For Use With PVC and CPVC pipe and fittings, Clear, 473 mL Container
Areas where plumbing code calls for verification that a primer be used
ASTM F656 | NSF14 for PW, DWV and Sewer | IAPMO Listed | Meets California SCAQMD 1171/M24 requirements | ANSI 61 health effects requirements | UL Greenguard Gold
Product Details
Attributes
Features
Resources
MASTERS®, PR500-C, Primer, 473 mL Container, For Use With: PVC and CPVC pipe and fittings, Clear
Container Size:473 mL
Color:Clear
Suitable For Use With:PVC and CPVC Pipe and Fittings
- Removes surface dirt grease and grime as well as softens the pipe and surface to allow a fast secure solvent weld
- For use in areas where plumbing code calls for verification that a primer be used
- Cut pipe ends square chamfer and clean pipe ends
- Check dry-fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Apply thoroughly to the inside of the fitting socket
- Apply thoroughly to the outside surface of the pipe to the approximate depth of the fitting
- Apply a second coat to the fitting socket
- While primer is still wet use an appropriate solvent cement for the pipe and fitting being joined
Product Details
MASTERS®, PR500-C, Primer, 473 mL Container, For Use With: PVC and CPVC pipe and fittings, Clear
Attributes
Container Size: 473 mL
Color: Clear
Suitable For Use With: PVC and CPVC Pipe and Fittings
Features
- Removes surface dirt grease and grime as well as softens the pipe and surface to allow a fast secure solvent weld
- For use in areas where plumbing code calls for verification that a primer be used
- Cut pipe ends square chamfer and clean pipe ends
- Check dry-fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Apply thoroughly to the inside of the fitting socket
- Apply thoroughly to the outside surface of the pipe to the approximate depth of the fitting
- Apply a second coat to the fitting socket
- While primer is still wet use an appropriate solvent cement for the pipe and fitting being joined