Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
EATON OS10D7-LA 120/277V 0-10V DIM SENSOR LIGHT ALMOND
Product Details
Attributes
Features
Resources
EATON, OS10D7-LA, Dimmer Sensor, 3-Way 1-Pole Wallbox, 120/277 V AC, 10 A at 120 V AC/8 A at 277 V AC, 1200/2200 W Power, Occupancy Sensor, 1000 sq-ft Coverage, 180 deg Viewing, 15 s to 20 min Time Delay, LED/Fluorescent Lamp, 60 Hz Response, 16 AWG Pre-Stripped Wire Lead Connection, Auto ON/OFF/Manual ON/OFF Control Output, Wireless RF Interface, Wall Mounting, 32 to 104 deg F, Polycarbonate, Light Almond, 1.969 in L x 2.756 in W x 4.252 in H Dimensions
Enjoy advanced energy savings and state-of-the-art automation with Eaton’s occupancy and vacancy sensors. Eaton's motion sensor lighting controls use advanced Passive Infrared (PIR) and ultrasonic sensing technology to detect your presence and switch lights ON. Then, once you’ve left the room, our sensors turn the lights OFF following a preset period of time. Sensors are the perfect solution for commercial and residential applications where a switch is inconveniently located and in spaces where lights may be left on accidentally.
- full range preset dimming control provided with horizontal dim/bright bar
- Digital circuitry provides aesthetically pleasing soft on/fade off
- Single green LED indicates motion
- Push pad design provides minimal travel and crisp actuation
- Provides 180 deg field of view and 1000 sq-ft of major motion coverage
- Selectable time delay of 15 s (test mode, changes to 2 min after 2 min of powering up), 5 min (factory default), 15 min and 20 min
- Adjustable high-end and low-end trim setting
- Occupancy sensor provides a selectable ambient light override preventing lights from switching on when there is acceptable natural light
- Occupancy sensor version allows to toggle between auto on/auto off or manual on/auto off mode with a simple press and hold of switch
- No leakage to load in off mode
- Uniform color matched PIR lens to device housing
- Compatible with dimmable 0 to 10 V LED and FLR ballasts
- Neutral required for installation of device
Product Details
EATON, OS10D7-LA, Dimmer Sensor, 3-Way 1-Pole Wallbox, 120/277 V AC, 10 A at 120 V AC/8 A at 277 V AC, 1200/2200 W Power, Occupancy Sensor, 1000 sq-ft Coverage, 180 deg Viewing, 15 s to 20 min Time Delay, LED/Fluorescent Lamp, 60 Hz Response, 16 AWG Pre-Stripped Wire Lead Connection, Auto ON/OFF/Manual ON/OFF Control Output, Wireless RF Interface, Wall Mounting, 32 to 104 deg F, Polycarbonate, Light Almond, 1.969 in L x 2.756 in W x 4.252 in H Dimensions
Enjoy advanced energy savings and state-of-the-art automation with Eaton’s occupancy and vacancy sensors. Eaton's motion sensor lighting controls use advanced Passive Infrared (PIR) and ultrasonic sensing technology to detect your presence and switch lights ON. Then, once you’ve left the room, our sensors turn the lights OFF following a preset period of time. Sensors are the perfect solution for commercial and residential applications where a switch is inconveniently located and in spaces where lights may be left on accidentally.
Attributes
Features
- full range preset dimming control provided with horizontal dim/bright bar
- Digital circuitry provides aesthetically pleasing soft on/fade off
- Single green LED indicates motion
- Push pad design provides minimal travel and crisp actuation
- Provides 180 deg field of view and 1000 sq-ft of major motion coverage
- Selectable time delay of 15 s (test mode, changes to 2 min after 2 min of powering up), 5 min (factory default), 15 min and 20 min
- Adjustable high-end and low-end trim setting
- Occupancy sensor provides a selectable ambient light override preventing lights from switching on when there is acceptable natural light
- Occupancy sensor version allows to toggle between auto on/auto off or manual on/auto off mode with a simple press and hold of switch
- No leakage to load in off mode
- Uniform color matched PIR lens to device housing
- Compatible with dimmable 0 to 10 V LED and FLR ballasts
- Neutral required for installation of device