Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
SIOUX CHIEF 652-A 1/2 HYDRA-RESTER
Product Details
Attributes
Features
Resources
Sioux Chief HydraRester™ Water Hammer Arrester, Series: 650, 1/2 in Nominal, MNPT, 350 psig, 1 to 11 Fixture Unit Capacity, 250 deg F, Copper Body, EPDM O-Ring, 6-1/2 in L x 1-3/8 in W
Sioux Chief 650 Series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer's instructions.
- Can be installed at any angle, and without access panels
- Lifetime cycle tested to withstand 10,000 shock cycles
Product Details
Sioux Chief HydraRester™ Water Hammer Arrester, Series: 650, 1/2 in Nominal, MNPT, 350 psig, 1 to 11 Fixture Unit Capacity, 250 deg F, Copper Body, EPDM O-Ring, 6-1/2 in L x 1-3/8 in W
Sioux Chief 650 Series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer's instructions.
Attributes
Features
- Can be installed at any angle, and without access panels
- Lifetime cycle tested to withstand 10,000 shock cycles