content loaded
DEWALT 2840 Image 1

DEWALT 02840-PWR ZAMAC HS 1/4 X 1

MFR Part #: 2840
SKU #: 1181899
Brand: DeWALT®
UPC: 75352028408
DeWALT® 2840 Hammer-Screw™ Nail Anchor, 1/4 in Dia, 1 in OAL, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head Head
(100) 1/4 x 1 in Powers Zamac Hammer-Screw Mushroom Head with NO 2 Phillips Type Screw 2839
For electrical fixtures, signage, drywall track, maintenance, surveillance equipment, brick ties and masonry anchorage

DeWALT® Nail Anchor, Series: Hammer-Screw™, 1/4 in Dia, 1 in Overall Length, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head, 1/4 in Drill, 7/8 in Minimum Embedment Depth, 650 lb at 2000 psi Shear Strength, 930 lb at 2000 psi Tensile, Zinc Plated/Perma Seal Fluoropolymer

The Zamac Hammer-Screw® is a unique, one-step drive anchor featuring a phillips type head and a screw thread for use in concrete, block, brick or stone. With a body formed from corrosion resistant Zamac alloy and a carbon or stainless steel drive screw, this anchor has been developed by powers as an improvement over standard nailing anchors.

Product Details

DeWALT® Nail Anchor, Series: Hammer-Screw™, 1/4 in Dia, 1 in Overall Length, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head, 1/4 in Drill, 7/8 in Minimum Embedment Depth, 650 lb at 2000 psi Shear Strength, 930 lb at 2000 psi Tensile, Zinc Plated/Perma Seal Fluoropolymer

The Zamac Hammer-Screw® is a unique, one-step drive anchor featuring a phillips type head and a screw thread for use in concrete, block, brick or stone. With a body formed from corrosion resistant Zamac alloy and a carbon or stainless steel drive screw, this anchor has been developed by powers as an improvement over standard nailing anchors.

Attributes

Body Shell Material: Zamac Alloy
Diameter: 1/4 in
Drill Size: 1/4 in
Finish: Zinc-Plated, Zinc Plated/Perma Seal Fluoropolymer
Grade: 1018
Head Size: 35/64 in Dia x 9/64 in H
Head Type: Mushroom Head, Mushroom
Length: 1 in
Material: Zamac Alloy Steel
Maximum Work Thickness: 5/16 in
Minimum Embedment: 1-1/8 in
Overall Length: 1 in
Pin Material: Carbon Steel
Series: Hammer-Screw™
Shear Strength: 650 lb at 2000 psi, 1290 lb
Tension Strength: 1090 lb

Features

  • General purpose anchoring
  • Installs in a variety of base materials
  • Removable anchor when screw is backed out with a phillips head driver
  • AISI 1018 carbon steel screw
  • ASTM B633, SC1, type III (Fe/Zn5) zinc screw plating
  • Normal weight concrete, hollow concrete masonry, brick masonry, stone are applicable materials
  • 850 lb at 4000 psi and 6000 psi shear strength for Concrete
  • 1205 lb at 4000 psi, 1250 lb at 6000 psi tensile strength for normal weight concrete

Resources

Catalog