Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
MODINE PDP250AE0130SBAN 250MBH PROPELLER UNIT HEATER
Product Details
Attributes
Features
Resources
MODINE Propeller Unit Heater, 250000 Btu/hr, 115 V, 7.75 A, 1053 fpm Flow Rate, 3700 cfm, 1/3 hp, 1 ph, 60 Hz, NPT Connection, 1/2 in Connection, Liquid Propane Gas, Natural Gas Fuel, 20 in Fan, 83 % Efficiency, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 1 Stages, 19 ft Mounting Height, 67 ft Heat Throw, Steel, Baked-On Polyester Powder-Coated, 50 deg F, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field converted to propane, if desired
- A safety pressure switch to assure safe venting conditions
- Designed to utilize the smallest diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity
- Aluminized steel heat exchanger or burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
Product Details
MODINE Propeller Unit Heater, 250000 Btu/hr, 115 V, 7.75 A, 1053 fpm Flow Rate, 3700 cfm, 1/3 hp, 1 ph, 60 Hz, NPT Connection, 1/2 in Connection, Liquid Propane Gas, Natural Gas Fuel, 20 in Fan, 83 % Efficiency, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 1 Stages, 19 ft Mounting Height, 67 ft Heat Throw, Steel, Baked-On Polyester Powder-Coated, 50 deg F, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
Attributes
Features
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field converted to propane, if desired
- A safety pressure switch to assure safe venting conditions
- Designed to utilize the smallest diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity
- Aluminized steel heat exchanger or burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions