Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
IPEX XFR 526300 4 HXTHR PVC TUBE END CLEANOUT WITH PLUG
MFR Part #: 526300
SKU #: 1030338
Brand: IPEX®
UPC: 622454374386
System XFR® 526300 Line Cleanout With Plug, PVC
Commercial, Industrial, Residential, Above Ground and Underground Applications
CAN/cUL S102.2 | CSA B181.2
Product Details
Attributes
Features
Resources
System XFR® Line Cleanout, 4-1/2 in OD, SCH 40 Schedule Rating, PVC
Connect this cleanout to a spigot end of your System XFR piping system to create an access point for inspection and cleaning. This cleanout features a gasketed plug to ensure a complete seal.
Material:PVC
Schedule Rating:SCH 40
Outside Diameter:4-1/2 in
- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
Product Details
System XFR® Line Cleanout, 4-1/2 in OD, SCH 40 Schedule Rating, PVC
Connect this cleanout to a spigot end of your System XFR piping system to create an access point for inspection and cleaning. This cleanout features a gasketed plug to ensure a complete seal.
Attributes
Material: PVC
Schedule Rating: SCH 40
Outside Diameter: 4-1/2 in
Features
- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation