Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
BRADFORD SW2120L 110USG COMMERCIAL INDIRECT WATER HEATER
MFR Part #: SW2120L
SKU #: 1256896
Brand: Bradford White®
UPC: 671632531189
Bradford White® SW2120L PowerStor Series® Single-Wall Indirect Water Heater, 157000 Btu/hr Heating, 116 gal Tank
Limited Lifetime Tank and Heat Exchanger Warranties/6-Year Limited Warranty on Component Parts
Temperature and Pressure Relief Valve
Residential Applications
AHRI Certified | ASHRAE 90.1b | CEC Listed | CSA LLC - Low Lead Content Approved | cETLus Listed | PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Product Details
Attributes
Features
Resources
Bradford White® Indirect Water Heater, Single-Wall, Series: PowerStor Series®, 157000 Btu/hr Heating, 116 gal Tank, 13.7 gpm, 3/4 in NPT Water Connection, Wall Mount, 150 psi, Ultra Low Nox: No, Steel, 28-1/4 in Dia x 62-1/2 in H
Bradford White POWERSTOR SERIES(TM) 110 Gallon Residential Indirect Water Heater With Single Wall Heat Exchanger with a Limited Lifetime Tank Warranty.
Country Of Origin:US
Dimensions:28-1/4 in Dia x 62-1/2 in H
Flow Rate:13.7 gpm
Heating Capacity:157000 Btu/hr
Tank Capacity:116 gal
Type:Single-Wall
Material:Steel
Mounting Type:Wall
Pressure Rating:150 psi
Series:PowerStor Series®
Ultra Low NOx:No
Water Connection:3/4 in NPT
Water Heater Type:Gas
- Heat exchanger - Single wall 1-1/2 in OD glass coated (Vitraglas®) carbon steel coil
- The coil has a heat transfer area of 14.2 sq-ft and a stored water volume of 2.7 gal, maximum supply temperature from the boiler must not exceed 240 deg F
- Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Immersed adjustable Honeywell aquastat - Fast acting immersion aquastat for automatic temperature control (adjustable from 80 to 160 deg F)
- Supply and return connections - 1 in FNPT connections are located on the front for both the boiler collector supply and return
- Insulation system - 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss
- This results in less energy consumption, improved efficiencies and jacket rigidity
- Potable water connections - Factory installed true dielectric fittings extend water heater life and eases installation
- Three protective aluminum anode rods - Provide added protection against corrosion for long-term, trouble-free service
- Steel tank - Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining
- Low restriction brass drain valve - Durable tamper proof design
- AHRI certified - These water heaters are rated by the air-conditioning, heating and refrigeration institute to provide accurate performance data within the standards of the certification
- This certification provides a recognized standard for proper comparison of hydronic appliances
Product Details
Bradford White® Indirect Water Heater, Single-Wall, Series: PowerStor Series®, 157000 Btu/hr Heating, 116 gal Tank, 13.7 gpm, 3/4 in NPT Water Connection, Wall Mount, 150 psi, Ultra Low Nox: No, Steel, 28-1/4 in Dia x 62-1/2 in H
Bradford White POWERSTOR SERIES(TM) 110 Gallon Residential Indirect Water Heater With Single Wall Heat Exchanger with a Limited Lifetime Tank Warranty.
Attributes
Country Of Origin: US
Dimensions: 28-1/4 in Dia x 62-1/2 in H
Flow Rate: 13.7 gpm
Heating Capacity: 157000 Btu/hr
Tank Capacity: 116 gal
Type: Single-Wall
Material: Steel
Mounting Type: Wall
Pressure Rating: 150 psi
Series: PowerStor Series®
Ultra Low NOx: No
Water Connection: 3/4 in NPT
Water Heater Type: Gas
Features
- Heat exchanger - Single wall 1-1/2 in OD glass coated (Vitraglas®) carbon steel coil
- The coil has a heat transfer area of 14.2 sq-ft and a stored water volume of 2.7 gal, maximum supply temperature from the boiler must not exceed 240 deg F
- Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Immersed adjustable Honeywell aquastat - Fast acting immersion aquastat for automatic temperature control (adjustable from 80 to 160 deg F)
- Supply and return connections - 1 in FNPT connections are located on the front for both the boiler collector supply and return
- Insulation system - 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss
- This results in less energy consumption, improved efficiencies and jacket rigidity
- Potable water connections - Factory installed true dielectric fittings extend water heater life and eases installation
- Three protective aluminum anode rods - Provide added protection against corrosion for long-term, trouble-free service
- Steel tank - Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining
- Low restriction brass drain valve - Durable tamper proof design
- AHRI certified - These water heaters are rated by the air-conditioning, heating and refrigeration institute to provide accurate performance data within the standards of the certification
- This certification provides a recognized standard for proper comparison of hydronic appliances