Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
CALEFACTIO HGTEV-42 75.8L THERMAL TANK WITH BASE RING
MFR Part #: HGTEV-42
SKU #: 1299017
Brand: Calefactio
UPC: 628235830270
Calefactio HGTEV-42 Expansion Tank with Replaceable Bladder, HGTEV Series, 20 gal, 3/4 in FNPT, 50 psi Pre-Charge, 150 psi, 200 deg F
CSA Drinking Water Certified | NSF/ANSI 372 Compliant | NSF/ANSI 61 Certified
Product Details
Attributes
Features
Resources
The HGTE-HGTEV Series bladder expansion tanks are designed for use in domestic installations for potable hot water applications. The tanks are installed in systems equipped with a backflow preventer or as an add-on to direct or indirect water heaters. The tank’s function is to absorb the increased volume of water that results from the heating process, thereby keeping the system’s pressure below the relief valve setting!
Connection Size:3/4 in
Connection Material:Stainless Steel
Connection Type:FNPT
Maximum Pressure:150 psi
Maximum Temperature:200 deg F
Volume:20 gal
Weight:31 Lbs
- Acceptance factor of 100%
- Water remains permanently separated from the air throughout the useful life of the installation
- The water does not escape the circuit. The steel tank never comes into contact with water
- Pre-charged at the factory to 50 PSI; tank need to be adjusted on site at the system operating pressure
- Certified to NSF61/ANSI 61 & 372 by CSA for use in potable water system
- Stainless steel connection
Product Details
The HGTE-HGTEV Series bladder expansion tanks are designed for use in domestic installations for potable hot water applications. The tanks are installed in systems equipped with a backflow preventer or as an add-on to direct or indirect water heaters. The tank’s function is to absorb the increased volume of water that results from the heating process, thereby keeping the system’s pressure below the relief valve setting!
Attributes
Connection Size: 3/4 in
Connection Material: Stainless Steel
Connection Type: FNPT
Maximum Pressure: 150 psi
Maximum Temperature: 200 deg F
Volume: 20 gal
Weight: 31 Lbs
Features
- Acceptance factor of 100%
- Water remains permanently separated from the air throughout the useful life of the installation
- The water does not escape the circuit. The steel tank never comes into contact with water
- Pre-charged at the factory to 50 PSI; tank need to be adjusted on site at the system operating pressure
- Certified to NSF61/ANSI 61 & 372 by CSA for use in potable water system
- Stainless steel connection