LEVITON ODD24-IDW 24V DIMMING SMART SENSOR
Product Details
Attributes
Features
Resources
Leviton® Wallbox Occupancy Sensor, 1-Pole Smart Dimming, Series: ODD24, 12 to 24 VDC, 0.02 A, Passive Infrared Sensor, 1200 sq-ft Coverage, 180 deg Viewing, LED Lamp, BLE 4.2/BLE 5.0 Connection, Manual ON/OFF Pushbutton Control Output, IP10 Enclosure, Wall Mounting, 32 to 104 deg F, White, 4.13 in L x 2.12 in W x 1.86 in H Dimensions
The Leviton® Smart 24 VDC Dimming Wallbox Sensor (ODD24-IDW) is designed for use with an OPP20 or OSA20 Power Pack or other Leviton® (24 VDC) low voltage sources. Lighting levels can be adjusted using the dimming bar next to the switch and uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper-resistant lens. When a person passes in or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and after the timeout expires. The ODD24-IDW features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. A minor motion zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The major motion zone exhibits a lesser degree of sensitivity requiring larger movements. Configuration of ODD24-IDW is made using the Leviton® Smart Sensor App from a smartphone or other Bluetooth® enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several common pre-configured options. The ODD24-IDW integrates a photocell for daylighting which can be programmed using the Leviton® Smart Sensor App.
- Can be used to comply with IECC, ASHRAE 90.1 and 2019 Title 24, Part 6 occupancy/vacancy sensing and dimming requirements
- 180 deg field of view provides approximately 1100 sq-ft of coverage
- Maximum sensing distance in front of the sensor is 30 to 40 ft and 15 to 20 ft on either side
- Advanced configuration can be performed using the Leviton® smart sensor App on any Bluetooth® enabled Android or iOS device: set operating mode to auto-on/auto-off or manual-on/auto-off
- Adjust the sensitivity of the sensor to increase or decrease coverage area, adjust timeouts, activate the nightlight and select nightlight colors, add daylighting hold-off and select target daylighting hold-off levels and set a security code to lock configuration settings
- Configure dimming options such as partial-on, partial-off and partial-off timeouts
- Out-of-the-box configuration default mode - auto-on/auto-off with 10 min time out
- Sensitivity set to 75%
- Nightlight and daylighting hold-off disabled
Product Details
Leviton® Wallbox Occupancy Sensor, 1-Pole Smart Dimming, Series: ODD24, 12 to 24 VDC, 0.02 A, Passive Infrared Sensor, 1200 sq-ft Coverage, 180 deg Viewing, LED Lamp, BLE 4.2/BLE 5.0 Connection, Manual ON/OFF Pushbutton Control Output, IP10 Enclosure, Wall Mounting, 32 to 104 deg F, White, 4.13 in L x 2.12 in W x 1.86 in H Dimensions
The Leviton® Smart 24 VDC Dimming Wallbox Sensor (ODD24-IDW) is designed for use with an OPP20 or OSA20 Power Pack or other Leviton® (24 VDC) low voltage sources. Lighting levels can be adjusted using the dimming bar next to the switch and uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper-resistant lens. When a person passes in or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and after the timeout expires. The ODD24-IDW features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. A minor motion zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The major motion zone exhibits a lesser degree of sensitivity requiring larger movements. Configuration of ODD24-IDW is made using the Leviton® Smart Sensor App from a smartphone or other Bluetooth® enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several common pre-configured options. The ODD24-IDW integrates a photocell for daylighting which can be programmed using the Leviton® Smart Sensor App.
Attributes
Features
- Can be used to comply with IECC, ASHRAE 90.1 and 2019 Title 24, Part 6 occupancy/vacancy sensing and dimming requirements
- 180 deg field of view provides approximately 1100 sq-ft of coverage
- Maximum sensing distance in front of the sensor is 30 to 40 ft and 15 to 20 ft on either side
- Advanced configuration can be performed using the Leviton® smart sensor App on any Bluetooth® enabled Android or iOS device: set operating mode to auto-on/auto-off or manual-on/auto-off
- Adjust the sensitivity of the sensor to increase or decrease coverage area, adjust timeouts, activate the nightlight and select nightlight colors, add daylighting hold-off and select target daylighting hold-off levels and set a security code to lock configuration settings
- Configure dimming options such as partial-on, partial-off and partial-off timeouts
- Out-of-the-box configuration default mode - auto-on/auto-off with 10 min time out
- Sensitivity set to 75%
- Nightlight and daylighting hold-off disabled