Our website will be unavailable for scheduled maintenance on Saturday, June 21 from 7:00 PM MST to Sunday, June 22 at 1:00 AM MST. We apologize for any inconvenience. For assistance, please contact [email protected].
OATEY CPVC500-C MASTERS CPVC-PRO MEDIUM CLEAR CEMENT 473ML
Product Details
Attributes
Features
Resources
MASTERS®, CPVC500-C, Cement, Medium Body Fast Set, 473 mL Container, For Use With: On all schedules and classes of CPVC pipe and fittings up to 6 in dia with interference fit, Clear, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Chlorinated, 40 to 110 deg F
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, CPVC500-C, Cement, Medium Body Fast Set, 473 mL Container, For Use With: On all schedules and classes of CPVC pipe and fittings up to 6 in dia with interference fit, Clear, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Chlorinated, 40 to 110 deg F
Attributes
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping