Happy Canada Day! Our locations will be closed on July 1st (Wednesday), and all online orders placed on Canada Day will be processed the following day.
content loaded
OATEY PVC250-C MASTERS PVC-PRO MEDIUM CLEAR CEMENT 237ML
MFR Part #: PVC250-C
SKU #: 1239910
Brand: Oatey | MASTERS®
UPC: 67001022622
MASTERS® PVC250-C Medium Body Fast Set Cement, 237 mL Container, Clear, For Use With On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Potable Water, Pressure Pipe, Conduit And DWV Applications
ASTM D2564 | NSF 14 for PW DWV and Sewer | IAPMO Listed | UL Greenguard Gold | ANSI 61 health effects requirements | Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements
Product Details
Attributes
Features
Resources
MASTERS®, PVC250-C, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Clear, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Container Size:237 mL
Type:Medium Body Fast Set
Composition:Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Odor/Scent:Solvent
Suitable For Use With:On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Temperature Rating:40 to 110 deg F
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, PVC250-C, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Clear, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Attributes
Container Size: 237 mL
Type: Medium Body Fast Set
Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Odor/Scent: Solvent
Suitable For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Temperature Rating: 40 to 110 deg F
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping