WATTS 0009870 LF3005A 1/2 CXMIP DIELECTRIC UNION
Product Details
Attributes
Features
Resources
WATTS® Dielectric Union, 1/2 in Nominal, MNPT x Solder, 1-1/2 in Hex, 2-5/8 in Length, 250 psi, Brass, 180 deg F, 1-1/2 in W, Domestic
Series LF3005A Lead Free Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3005A is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping.
- Designed and manufactured to the highest quality standards
- Individually factory certified to withstand a minimum of 600 V on a dry line with no flashover
- Steel adapter and nut
- Polysulfone insulator
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- Maximum pressure is 250 psi (17.2 bar)
- Maximum temperature 180 deg F (82 deg C)
- MIP thread to solder connections
Product Details
WATTS® Dielectric Union, 1/2 in Nominal, MNPT x Solder, 1-1/2 in Hex, 2-5/8 in Length, 250 psi, Brass, 180 deg F, 1-1/2 in W, Domestic
Series LF3005A Lead Free Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3005A is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping.
Attributes
Features
- Designed and manufactured to the highest quality standards
- Individually factory certified to withstand a minimum of 600 V on a dry line with no flashover
- Steel adapter and nut
- Polysulfone insulator
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- Maximum pressure is 250 psi (17.2 bar)
- Maximum temperature 180 deg F (82 deg C)
- MIP thread to solder connections