WATTS 0121227 LF150A 1/2 IP WATER HAMMER ARRESTOR
Product Details
Attributes
Features
Resources
WATTS® Water Hammer Arrester, Series: LF150, 1/2 in Nominal, NPT, 150 psi, 180 deg F, Domestic
This 1/2 inch lead free water hammer arrestor provides economical and effective single fixture protection used in residential or domestic water applications such as dishwashers, washing machines, and quick closing faucets. It is designed to control the water pressure shock and prevent water hammer conditions that are damaging to pipes and appliances. It consists of a stainless steel top and lower chamber, sealed-in diaphragm which flexes to absorb the shock, and a lead free brass hex adapter for easy installation. This may be installed in new or existing plumbing systems vertically, horizontally or at any angle and should be installed as close to the shock source as possible, with one unit for each hot and cold water line up to 150 psi (10.6 bar) working pressure. It is factory air charged at 30 psi (207 kPa) and is easily rechargeable with a standard tire valve connection and air-tight sealing cap.
- Molded diaphragm with a special thermoplastic coating to prevent rust
- Precharged air chamber
- Complete stainless steel chamber construction
- Easily rechargeable with standard tire valve
- 1/2 IN NPT connection for easy installation
- Unit is factory pre-charged to 30 psi (207 kPa)
Product Details
WATTS® Water Hammer Arrester, Series: LF150, 1/2 in Nominal, NPT, 150 psi, 180 deg F, Domestic
This 1/2 inch lead free water hammer arrestor provides economical and effective single fixture protection used in residential or domestic water applications such as dishwashers, washing machines, and quick closing faucets. It is designed to control the water pressure shock and prevent water hammer conditions that are damaging to pipes and appliances. It consists of a stainless steel top and lower chamber, sealed-in diaphragm which flexes to absorb the shock, and a lead free brass hex adapter for easy installation. This may be installed in new or existing plumbing systems vertically, horizontally or at any angle and should be installed as close to the shock source as possible, with one unit for each hot and cold water line up to 150 psi (10.6 bar) working pressure. It is factory air charged at 30 psi (207 kPa) and is easily rechargeable with a standard tire valve connection and air-tight sealing cap.
Attributes
Features
- Molded diaphragm with a special thermoplastic coating to prevent rust
- Precharged air chamber
- Complete stainless steel chamber construction
- Easily rechargeable with standard tire valve
- 1/2 IN NPT connection for easy installation
- Unit is factory pre-charged to 30 psi (207 kPa)